On 03/09/2015 11:04 AM, Simon Glass wrote:
Hi Stephen,
On 8 March 2015 at 15:00, Stephen Warren <swar...@nvidia.com> wrote:
On 03/04/2015 03:16 PM, Tom Rini wrote:
On Tue, Mar 03, 2015 at 08:02:59AM -0700, Simon Glass wrote:
Use the full driver model GPIO and serial drivers in SPL now that
these are supported. Since device tree is not available they will
use platform data.
Remove the special SPL GPIO function as it is no longer needed.
This is all in one commit to maintain bisectability.
Signed-off-by: Simon Glass <s...@chromium.org>
Applied to u-boot/master, thanks!
This patch breaks the serial console on at least NVIDIA Tegra
Seaboard. LCD/usbkbd still work though. I can't test any other Tegra
boards right now since I'm not at work. I wonder if the UART/SPI GPIO
is at issue? That would be specific to this board.
Could be - what do you have it set to? I should be able to give it
another test sometime today and nut it out.
I assume it must be set to "GPIO control" (especially since a
GPIO-related change broke it). IIRC it came this way, and since the
board boots from NAND and hence SPI isn't useful, I was going to change
it to "always UART". However, when I attempted to modify my other
Seaboard (actually, Springbank) that way, I broke one of the pads on the
PCB. Luckily that left the board in the "always UART" state that I
wanted, even without any pull-ups/downs present. Anyway, I decided not
to touch my other board for fear of breaking it in a way that didn't
work at all!
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
