Hi,
On 24-02-15 10:02, Hans de Goede wrote:
Hi,
On 23-02-15 18:45, Pantelis Antoniou wrote:
Hi Hans,
On Feb 19, 2015, at 22:03 , Hans de Goede <[email protected]> wrote:
High Capacity (e)MMC cards work fine on sun4i / sun5i, and not having this
capability set causes u-boot to not recognize the eMMC on an Utoo P66 A13
tablet, so always set it thereby fixing this.
Signed-off-by: Hans de Goede <[email protected]>
---
drivers/mmc/sunxi_mmc.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index ebfec7c..2233545 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -449,11 +449,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
cfg->host_caps = MMC_MODE_4BIT;
- cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
-#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
- defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN9I)
- cfg->host_caps |= MMC_MODE_HC;
-#endif
+ cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
cfg->f_min = 400000;
--
2.1.0
Thanks, applied.
Thanks, but since this was touching only sunxi code this has already been
merged through the sunxi tree, if you rebase on the latest master this
should drop from your tree.
Ah I see that Tom has already pulled from your tree too, so now the patch
is upstream through both pulls, which git handles without problems, so
we're good here.
Regards,
Hans
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
