To use Derive Model before relocation, CONFIG_SYS_MALLOC_F
must be enabled. This should probably be a common requirement
for all the boards with Driver Model implementation.
Let's handle it globally rather than per-SoC or per-board.
Signed-off-by: Masahiro Yamada <yamad...@jp.panasonic.com>
---
Changes in v3:
- Newly added
Changes in v2: None
Kconfig | 1 +
arch/arm/cpu/armv7/exynos/Kconfig | 3 ---
arch/arm/cpu/armv7/omap3/Kconfig | 3 ---
arch/arm/cpu/armv7/tegra-common/Kconfig | 3 ---
arch/arm/cpu/armv7/uniphier/Kconfig | 3 ---
arch/x86/Kconfig | 3 ---
board/amcc/canyonlands/Kconfig | 4 ----
board/ti/am335x/Kconfig | 3 ---
8 files changed, 1 insertion(+), 22 deletions(-)
diff --git a/Kconfig b/Kconfig
index a66a97f..2ddec81 100644
--- a/Kconfig
+++ b/Kconfig
@@ -54,6 +54,7 @@ config CC_OPTIMIZE_FOR_SIZE
config SYS_MALLOC_F
bool "Enable malloc() pool before relocation"
+ default y if DM
help
Before relocation memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig
b/arch/arm/cpu/armv7/exynos/Kconfig
index 9e47ed3..bd7540a 100644
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -80,9 +80,6 @@ config DM_SPI_FLASH
config DM_GPIO
default y
-config SYS_MALLOC_F
- default y
-
source "board/samsung/smdkv310/Kconfig"
source "board/samsung/trats/Kconfig"
source "board/samsung/universal_c210/Kconfig"
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index b3d5ef3..a38d471 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -102,9 +102,6 @@ config DM_GPIO
config DM_SERIAL
default y if DM
-config SYS_MALLOC_F
- default y if DM
-
config SYS_SOC
default "omap3"
diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig
b/arch/arm/cpu/armv7/tegra-common/Kconfig
index 2003fc8..b1c4f2a 100644
--- a/arch/arm/cpu/armv7/tegra-common/Kconfig
+++ b/arch/arm/cpu/armv7/tegra-common/Kconfig
@@ -17,9 +17,6 @@ config TEGRA124
endchoice
-config SYS_MALLOC_F
- default y
-
config ARCH_MALLOC_F_LEN
hex
default 0x1800
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig
b/arch/arm/cpu/armv7/uniphier/Kconfig
index b6dc75f..20e20a5 100644
--- a/arch/arm/cpu/armv7/uniphier/Kconfig
+++ b/arch/arm/cpu/armv7/uniphier/Kconfig
@@ -48,9 +48,6 @@ config DCC_MICRO_SUPPORT_CARD
endchoice
-config SYS_MALLOC_F
- default y
-
config CMD_PINMON
bool "Enable boot mode pins monitor command"
default y
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 0e49dd3..46caa6d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -76,9 +76,6 @@ config DM_GPIO
config DM_SERIAL
default y
-config SYS_MALLOC_F
- default y
-
config ARCH_MALLOC_F_LEN
hex
default 0x800
diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig
index c0dbd18..46efa7a 100644
--- a/board/amcc/canyonlands/Kconfig
+++ b/board/amcc/canyonlands/Kconfig
@@ -39,8 +39,4 @@ config DM
config DM_SERIAL
default y
-config SYS_MALLOC_F
- bool
- default y
-
endif
diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig
index 8c45892..7cb006f 100644
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -47,7 +47,4 @@ config DM_GPIO
config DM_SERIAL
default y if DM
-config SYS_MALLOC_F
- default y if DM
-
endif
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
