Hi Peng, On 12/02/2015 02:36, Peng Fan wrote: > This patch set is extracted from the previous "imx:mx6 add ldo bypass" > patch set, with only one return value change. > > patch 1/3 is add pad settings for I2C1 > patch 2/3 is add I2C and PMIC support in board header file > patch 3/3 is to add pmic support for mx6slevk. > > patch 3/3 is from patch 3/12 in previous "imx:mx6 add ldo bypass" patch, > with only one small change is return value. > > Changes v3: > Take Fabio's suggestion, for patch 3/3, remove ret variable, and directly > "return pfuze_mode_init(xxx)" > > Changes v2: > Changing "return -EIO" to "return ret". > > Peng Fan (3): > imx:mx6sl add I2c pad settings > imx:mx6slevk add pmic and i2c configuration > imx:mx6slevk implement power init board > > arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 5 ++++ > board/freescale/mx6slevk/mx6slevk.c | 42 > ++++++++++++++++++++++++++++++ > include/configs/mx6slevk.h | 12 +++++++++ > 3 files changed, 59 insertions(+) >
They look good for me - if no comments will be posted, they will be merge by next iteration. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
