Hi Nikita Kiryanov,
On 02/08/2015 07:35 PM, Nikita Kiryanov wrote:
Hi Bo,
On 02/04/2015 09:25 AM, Bo Shen wrote:
Hi Nikita Kiryanov,
On 02/03/2015 07:32 PM, Nikita Kiryanov wrote:
[..]
#ifdef CONFIG_LCD_LOGO
void bitmap_plot(int x, int y)
diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c
index 935ae42..0ce2370 100644
--- a/drivers/video/atmel_hlcdfb.c
+++ b/drivers/video/atmel_hlcdfb.c
@@ -13,6 +13,10 @@
#include <lcd.h>
#include <atmel_hlcdc.h>
+#if defined(CONFIG_LCD_LOGO)
+#include <bmp_logo.h>
+#endif
I think we can include this file directly.
bmp_logo.h does not exist without CONFIG_LCD_LOGO.
Oh yes, my bad.
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8
@@ -37,6 +41,15 @@ void lcd_setcolreg(ushort regno, ushort red,
ushort green, ushort blue)
panel_info.mmio + ATMEL_LCDC_LUT(regno));
}
+ushort *configuration_get_cmap(void)
+{
+#if defined(CONFIG_LCD_LOGO)
+ return bmp_logo_palette;
+#else
+ return NULL;
+#endif
+}
Here, I think no need to do the CONFIG_LCD_LOGO check, return
bmp_logo_palette directly, as it will be used when use bmp command in
8 bit mode. However, no hardware to test LCDC work or not in 8 bit
mode :(
This would make CONFIG_LCD_LOGO a prerequisite for this driver
(bmp_logo_palette does not exist otherwise), and I don't think it's
right to couple the two.
OK. let's keep this as is.
void lcd_ctrl_init(void *lcdbase)
{
unsigned long value;
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 3cf008c..fa6a82c 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -29,6 +29,11 @@
#define lcdc_readl(mmio, reg) __raw_readl((mmio)+(reg))
#define lcdc_writel(mmio, reg, val) __raw_writel((val),
(mmio)+(reg))
Best Regards,
Bo Shen
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
