On 12/23/2014 02:50 AM, Diego Santa Cruz wrote:
There is currently no command that will provide an overview of the hardware
partitions present on an eMMC device, one has to switch to every partition
via "mmc dev" and run mmcinfo for each to get the partition's capacity.
This commit adds a few lines of output to mmcinfo with the sizes of the
present partitions, like this:
Device: OMAP SD/MMC
Manufacturer ID: fe
OEM: 14e
Name: MMC16
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.41
High Capacity: Yes
Capacity: 13.8 GiB
Bus Width: 4-bit
User Capacity: 13.8 GiB
Boot Capacity: 16 MiB
RPMB Capacity: 128 KiB
GP1 Capacity: 64 MiB
GP2 Capacity: 64 MiB
I have an MMC device which has at least boot HW partitions, yet with the
very latest code in u-boot.git, I don't see the additional lines
mentioned above. My HW partitions are still working fine, since I can
select a boot partition and mmcinfo shows the correct "Capacity" for it:
Any ideas why?
Tegra124 (Jetson TK1) # mmc dev 0
switch to partitions #0, OK
mmc0(part 0) is current device
Tegra124 (Jetson TK1) # mmcinfo
Device: Tegra SD/MMC
Manufacturer ID: 45
OEM: 100
Name: SEM16
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.5
High Capacity: Yes
Capacity: 14.7 GiB <<<< Sounds right for a 16GB device with partitions
Bus Width: 8-bit
Erase Group Size: 512 KiB
<<<< No HW partition information is printed here
Tegra124 (Jetson TK1) # mmc dev 0 1 <<<< select "boot0" HW partition
switch to partitions #1, OK
mmc0(part 1) is current device
Tegra124 (Jetson TK1) # mmcinfo
Device: Tegra SD/MMC
Manufacturer ID: 45
OEM: 100
Name: SEM16
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.5
High Capacity: Yes
Capacity: 4 MiB <<<< "boot0" partition size correctly reported
Bus Width: 8-bit
Erase Group Size: 512 KiB
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
