This series adds support for booting mx28 based boards which do not include a battery as per Freescale application note AN4199
Patch 2 (which implements booting without a battery) is based on a patch submitted to the Freescale community forums by Damien Gotfroi (Cc'd) The patch series adds the following functionality (in oreder of implementation) - Debug output for mxs SPL (define DEBUG and CONFIG_SPL_SERIAL_SUPPORT in order to enable) - Ability to boot mx28 boards without a battery as per AN4199 (define CONFIG_SYS_MXS_VDD5V_ONLY to enable) - A tight loop (with 'Waiting for JTAG user') at the completion of SPL init if booting with the bootmode jumpers set to JTAG - Move the PLL power-up to a more logical location and properly initialise and check for PLL lock - Finally, add the G2C1 board Graeme Russ (5): Add debug output to mx29 SPL source files Enable booting of mx28 without battery Add 'Wait for JTAG user' if booted in JTAG mode Move PLL power-up from power init to memory init Add support for ReachTech G2C1 board arch/arm/Kconfig | 13 + arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 7 + arch/arm/cpu/arm926ejs/mxs/spl_lradc_init.c | 13 +- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 49 +++ arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 287 ++++++++++++++++-- board/reachtech/g2c1/Kconfig | 15 + board/reachtech/g2c1/MAINTAINERS | 9 + board/reachtech/g2c1/Makefile | 12 + board/reachtech/g2c1/README | 58 ++++ board/reachtech/g2c1/g2c1.c | 79 +++++ board/reachtech/g2c1/spl_boot.c | 452 ++++++++++++++++++++++++++++ configs/g2c1_defconfig | 3 + doc/README.mxs | 10 + include/configs/g2c1.h | 303 +++++++++++++++++++ 14 files changed, 1281 insertions(+), 29 deletions(-) create mode 100644 board/reachtech/g2c1/Kconfig create mode 100644 board/reachtech/g2c1/MAINTAINERS create mode 100644 board/reachtech/g2c1/Makefile create mode 100644 board/reachtech/g2c1/README create mode 100644 board/reachtech/g2c1/g2c1.c create mode 100644 board/reachtech/g2c1/spl_boot.c create mode 100644 configs/g2c1_defconfig create mode 100644 include/configs/g2c1.h -- 1.9.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
