On Thursday, January 22, 2015 at 01:42:10 PM, Fabio Estevam wrote: > Hi Graeme, > > On Wed, Jan 21, 2015 at 9:55 AM, Graeme Russ <gr...@tss-engineering.com> wrote: > > Section 4.1.2 of Freescale Application Note AN4199 describes the > > configuration required to operate the mx28 from a 5V source without a > > battery. This patch implements the changes to the Freescale bootlets > > which allow this configuration to properly boot the mx28 processor > > > > Signed-off-by: Graeme Russ <gr...@tss-engineering.com> > > --- > > > > arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 190 > > +++++++++++++++++++++++++++- doc/README.mxs > > | 10 ++ > > Damien posted today a new version of this patch in the imx community, > which is a lot simpler.
Guys, we have U-Boot mailing list for posting U-Boot patches. It'd be nice if you could use it to prevent fragmentation of efforts ;-) But of course, the effort is appreciated, just a rant. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
