Hi,
On 04-01-15 20:15, Michal Suchanek wrote:
Current value is 1.25V. Most boards use 1.3V which is expected more
stable. Can be overriden later by kernel setting anyway.
What makes you say that most boards use 1.3 V ? All the fex files
in sunxi-boards/sys_config/a10s/ either do not specify DCDC4, or
use 1200, which is lower then what we set already.
Also please Cc patches for upstream u-boot to the upstream
u-boot list.
Regards,
Hans
Signed-off-by: Michal Suchanek <hramr...@gmail.com>
---
board/sunxi/board.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 4c1c69a..dda2d43 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -162,7 +162,7 @@ void sunxi_board_init(void)
power_failed = axp152_init();
power_failed |= axp152_set_dcdc2(1400);
power_failed |= axp152_set_dcdc3(1500);
- power_failed |= axp152_set_dcdc4(1250);
+ power_failed |= axp152_set_dcdc4(1300);
power_failed |= axp152_set_ldo2(3000);
#endif
#ifdef CONFIG_AXP209_POWER
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
