On 12 December 2014 at 18:35, Bin Meng <bmeng...@gmail.com> wrote:
> The Crown Bay board has an SST25VF016B flash connected to the Tunnel
> Creek processor SPI controller used as the BIOS media where U-Boot
> is stored. Enable this flash support.
Is this necessary to enable flash at BIOS media?
How about other flash media's, is this specific to x86 cpu to store
u-boot always in
spi flash.
>
> Signed-off-by: Bin Meng <bmeng...@gmail.com>
> Acked-by: Simon Glass <s...@chromium.org>
>
> ---
>
> Changes in v3:
> - Add a commit message for the SPI support
>
> Changes in v2:
> - Move PCH_LPC_DEV to arch/x86/include/asm/arch-queensbay/tnc.h
> - Check return value of x86_cpu_init_f()
>
> arch/x86/cpu/queensbay/tnc.c | 26 +++++++++++++++++++++++++-
> arch/x86/include/asm/arch-queensbay/tnc.h | 15 +++++++++++++++
> include/configs/crownbay.h | 2 ++
> 3 files changed, 42 insertions(+), 1 deletion(-)
> create mode 100644 arch/x86/include/asm/arch-queensbay/tnc.h
>
> diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
> index 8b9815f..8637cdc 100644
> --- a/arch/x86/cpu/queensbay/tnc.c
> +++ b/arch/x86/cpu/queensbay/tnc.c
> @@ -6,18 +6,42 @@
>
> #include <common.h>
> #include <asm/io.h>
> +#include <asm/pci.h>
> #include <asm/post.h>
> +#include <asm/arch/tnc.h>
> #include <asm/arch/fsp/fsp_support.h>
> #include <asm/processor.h>
>
> +static void unprotect_spi_flash(void)
> +{
> + u32 bc;
> +
> + bc = pci_read_config32(PCH_LPC_DEV, 0xd8);
> + bc |= 0x1; /* unprotect the flash */
> + pci_write_config32(PCH_LPC_DEV, 0xd8, bc);
> +}
> +
> int arch_cpu_init(void)
> {
> + struct pci_controller *hose;
> + int ret;
> +
> post_code(POST_CPU_INIT);
> #ifdef CONFIG_SYS_X86_TSC_TIMER
> timer_set_base(rdtsc());
> #endif
>
> - return x86_cpu_init_f();
> + ret = x86_cpu_init_f();
> + if (ret)
> + return ret;
> +
> + ret = pci_early_init_hose(&hose);
> + if (ret)
> + return ret;
> +
> + unprotect_spi_flash();
> +
> + return 0;
> }
>
> int print_cpuinfo(void)
> diff --git a/arch/x86/include/asm/arch-queensbay/tnc.h
> b/arch/x86/include/asm/arch-queensbay/tnc.h
> new file mode 100644
> index 0000000..67c5e05
> --- /dev/null
> +++ b/arch/x86/include/asm/arch-queensbay/tnc.h
> @@ -0,0 +1,15 @@
> +/*
> + * Copyright (C) 2014, Bin Meng <bmeng...@gmail.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _X86_ARCH_TNC_H_
> +#define _X86_ARCH_TNC_H_
> +
> +#include <pci.h>
> +
> +/* PCI Configuration Space (D31:F0): LPC */
> +#define PCH_LPC_DEV PCI_BDF(0, 0x1f, 0)
> +
> +#endif /* _X86_ARCH_TNC_H_ */
> diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
> index 2314e62..a051b11 100644
> --- a/include/configs/crownbay.h
> +++ b/include/configs/crownbay.h
> @@ -45,6 +45,8 @@
> #define CONFIG_SCSI_DEV_LIST \
> {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
>
> +#define CONFIG_SPI_FLASH_SST
> +
> /* Video is not supported */
> #undef CONFIG_VIDEO
> #undef CONFIG_CFB_CONSOLE
> --
> 1.8.2.1
thanks!
--
Jagan.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
