Hi Jagan, On Thu, Dec 11, 2014 at 2:41 AM, Jagan Teki <jagannadh.t...@gmail.com> wrote: > Hi Bin, > > On 10 December 2014 at 18:21, Bin Meng <bmeng...@gmail.com> wrote: >> This series update SPI flash supported read commands per datasheet >> in the flash params table, and change flash sector size to 4KiB as >> long as flash supports sector erase (20h) command, to ensure >> 'sf erase offset +len' work on 4KiB boundary instead of 64KiB when >> given SECT_4K. >> >> Changes in v3: >> - Rebase with Jagan's patch series @ >> http://patchwork.ozlabs.org/patch/419154/ >> >> >> Bin Meng (9): >> sf: Update SST flash params >> sf: Update Atmel flash params >> sf: Update EON flash params >> sf: Update GigaDevice flash params >> sf: Update Macronix flash params >> sf: Update Spansion flash params >> sf: Update Micron flash params >> sf: Update Winbond flash params >> sf: Give proper spacing between flash table params > > Thanks for the updates - have you verified these changes?
I verified some, but not all of these flash parts. The update is based on flash datasheet, so if something is broken, eg before this series the flash advertises only READ_NORM and after my series it is changed to READ_FULL, and let's say QUAD_IO_FAST is not working, it is very likely that the SPI controller driver has some bugs when supporting QUAD_IO_FAST. >> >> drivers/mtd/spi/sf_internal.h | 5 ++ >> drivers/mtd/spi/sf_params.c | 185 >> ++++++++++++++++++++++-------------------- >> drivers/mtd/spi/sf_probe.c | 4 + >> 3 files changed, 104 insertions(+), 90 deletions(-) >> >> -- >> 1.8.2.1 >> > > thanks! > -- > Jagan. Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
