Hi, On 3 December 2014 at 05:46, Przemyslaw Marczak <p.marc...@samsung.com> wrote: > Hello all, > > > On 12/02/2014 08:07 AM, Hyungwon Hwang wrote: >> >> This is v10 of the patchset adding support Odroud XU3 board. >> >> link to the previous version: >> v2: https://www.mail-archive.com/u-boot@lists.denx.de/msg152275.html >> v3: https://www.mail-archive.com/u-boot%40lists.denx.de/msg152677.html >> v4: https://patchwork.ozlabs.org/patch/407411/ >> v5: https://patchwork.ozlabs.org/patch/407941/ >> v6: https://patchwork.ozlabs.org/patch/408647/ >> v7: https://patchwork.ozlabs.org/patch/410204/ >> v8: https://patchwork.ozlabs.org/patch/410709/ >> v9: https://patchwork.ozlabs.org/patch/415514/ >> >> The patchset by Akshay Saraswat is already merged into u-boot-samsung. >> Please ignore the instruction about the additional patchset in v8. >> >> How to test this patch: >> 1. git clone http://git.denx.de/u-boot-samsung.git >> 2. Apply this patchset >> 3. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- odroid-xu3_config >> 4. make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j8 >> 5. Now you can use u-boot-dtb.bin for your downloading >> >> WARNING: (update in V10) >> It was impossible to make the u-boot image smaller than 335872 bytes, and >> also >> I did not want to waste my time to make it fit for that restriction, >> because >> the discussion about this issue is in progress in malining list. I used >> BL2 by >> Suriyan Ramasami <suriya...@gmail.com> which the restriction is removed >> for >> testing. If you need the BL2 for testing, please contact me or Suriyan. >> >> Note: If you use micro SD card for your test you have to apply the below >> patch additionally. This patch is needed, because micro sd card is >> recognized as MMC1 instead of MMC0. Additional work is needed to make it >> work regardless of device id. >> >> Thanks for Sjoerd Simons. Not only did he comment my patchset, but he also >> made >> real patch for me. I squashed some part of that patchset, and included the >> remainings into my patchset. >> >> diff --git a/include/configs/exynos5-common.h >> b/include/configs/exynos5-common.h >> index ba591e7..437eaae 100644 >> --- a/include/configs/exynos5-common.h >> +++ b/include/configs/exynos5-common.h >> @@ -109,7 +109,7 @@ >> >> #define CONFIG_SYS_MONITOR_BASE 0x00000000 >> >> -#define CONFIG_SYS_MMC_ENV_DEV 0 >> +#define CONFIG_SYS_MMC_ENV_DEV 1 >> >> #define CONFIG_SECURE_BL1_ONLY >> >> Changes for v2: >> - Add a patch to add new common setup header file for Odroid X2/U3 >> and Odroid XU3 >> >> Changes for v3: >> - Remove the patch which adds new common setup header file from v2 >> - Remove the wrong patch to fix GPIO information of Exynos 5800 >> - Remove unnecessary node from DT file >> - Remove unnecessary features from config file >> - Fix some trivial typos in comments >> >> Changes for v4: >> - Add MMC FIFO buffer's configuration to DT file >> - Make CONFIG_OF_CONTROL be set by the target information >> - Add basic document to doc/README.odroid-xu3 >> - Add CONFIG_CMD_EXT4 to config file >> - Add environment size and offset to config file >> - Add extra default environment to make bootable without modification >> - Remove unnecessary features from config file >> >> Changes for v5: >> - Add the specific build instruction >> - Update the information of patchset by Akshay Saraswat >> - Convert /include/ to #include in DT file >> >> Changes for v6: >> - Separate out the documentation to new commit >> - Remove unnecessary header file inclusuib from the board-specific setup >> file >> - Make the function board_clock_init be declared, only when >> CONFIG_BOARD_EARLY_INIT_F is defined >> >> Changes for v7: >> - Fix several errata in the documentation >> - Remove OF_CONTROL dependency from !SPL_BUILD >> >> Changes for v8: >> - Remove unnecessary properties in DT mmc node >> >> Changes for v9: >> - Remove the first patch which change GPIO entries order. It became >> useless, >> after DT support is added >> - Remove useless variables in the default environment >> - Add the new contents to the documentation of Odroid X2/U2, instead of >> making new document for Odorid XU3 >> - Remove the detailed information in the header file, and leave the >> reference to the documentation >> >> Changes for v10: >> - Move the non common configs in Exynos5420 config file to each board file >> - Remove the config unsets which are added to make the result image small >> This is needless now, because the image is not small enough even though >> these >> unsets are added. >> - Remove redundant DT node and properties >> - Remove the odroid-xu3 board file and make odroid-xu3 a variant of >> smdk5420 >> - Fix some errata in documentation >> - Include the patch by Sjoerd Simons as 4th patch >> >> Hyungwon Hwang (3): >> config: exynos5420: move non common configs to specific board files >> Odroid-XU3: Add support for Odroid-XU3 >> Odroid-XU3: Add documentation for Odroid-XU3 >> >> Sjoerd Simons (1): >> Odroid-XU3: Add entry for DTS EHCI GPIO >> >> arch/arm/cpu/armv7/exynos/Kconfig | 4 +++ >> arch/arm/dts/Makefile | 3 +- >> arch/arm/dts/exynos5422-odroidxu3.dts | 49 >> +++++++++++++++++++++++++++++++ >> board/samsung/smdk5420/Kconfig | 13 +++++++++ >> configs/odroid-xu3_defconfig | 4 +++ >> doc/README.odroid | 46 ++++++++++++++++++----------- >> include/configs/exynos5420-common.h | 18 ------------ >> include/configs/odroid_xu3.h | 54 >> +++++++++++++++++++++++++++++++++++ >> include/configs/peach-pi.h | 6 ++++ >> include/configs/peach-pit.h | 6 ++++ >> include/configs/smdk5420.h | 11 +++++++ >> 11 files changed, 179 insertions(+), 35 deletions(-) >> create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts >> create mode 100644 configs/odroid-xu3_defconfig >> create mode 100644 include/configs/odroid_xu3.h >> > > I talked to man from the hardkernel, and he said that there is no > restrictions about adding BL1/BL2/TZSW as a binary blob to the Mainline > U-Boot. So I think, in this case it should be provided also with those > patches. Then we have a complete board setup. > > To Hyungwon, > There is a size limit for each patch (100KiB), so if you would like to add > such binary blob, you should add it using this site: > http://www.denx.de/wiki/attach/U-Boot/TooBigPatches > after a registration.
If the intent is to upload a hexdump of a few of the files, that does sound like a convenient option. Very unfortunate though. At least for the trustzone file it is mostly zeroes, and seems to consist of 3 separate very small images. So perhaps we should have a tool that pieces them together? Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
