Hi Stefan,
On Fri, 14 Nov 2014 08:20:06 +0100 Stefan Roese <s...@denx.de> wrote: > Hi Masahiro-san, > > On 14.11.2014 07:03, Masahiro Yamada wrote: > >> This patch includes the latest DT sources for socfpga from the current > >> Linux kernel. And enables CONFIG_OF_CONTROL for the new build target > >> "socfpga_socrates" (the EBV SoCrates board) to make use of this new DT > >> support. > >> > >> Until this patch, the only SoCFPGA U-Boot target in mainline is > >> "socfpga_cyclone5". This build target is not (yet) changed to support > >> DT. So nothing changes for this target. Even though the long-term > >> goal should be to move all SoCFPGA targets over to DT. > >> > >> One of the reasons to enable DT support in SoCFPGA is, that I need to > >> support multiple different SPI controllers for this platform. This is > >> the QSPI Cadence controller and the Designware SPI master controller. > >> Both are implemented in the SoCFPGA. And enabling both controllers is > >> only possible by using the new driver model (DM). The DM SPI code > >> only supports DT based probing. So it was easier to move SoCFPGA to > >> DT than to add the (deprecated) platform-data based probing to the > >> DM SPI suport. > >> > >> Note that the image with the dtb embedded is u-boot-dtb.img. This needs > >> to be used now for those DT enabled boards instead of u-boot.img. > > > > > > Since this patch was applied, I see a warning message > > WARNING: no status info for 'socfpga_socrates' > > WARNING: no maintainers for 'socfpga_socrates' > > when I run tools/genboardscfg.py > > > > > > I think you should add the maintainership info > > F: configs/socfpga_socrates_defconfig > > to somewhere of MAINTAINERS to suppress the warning message. > > Yes, should be done. Not sure where I should add such information though. We > don't have a board directory for this socrates board (yet). And the toplevel > MAINTAINERS file seems to be reserved for the custodian entries. > > Any ideas / suggestions welcome. > It looks like this socfpga_socrates board borrows most of the parts from socfpga_cyclone board, so I think you can append your maintainership info to board/altera/socfpga/MAINTAINERS. Perhaps it might be helpful to refer to board/sunxi/MAINTAINERS. The core support of SUNXI boards are owned by Hans de Goede and some additional files are maintained by other people. Best Regards Masahiro Yamada _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
