From: Shaohui Xie <shaohui....@freescale.com>

Since xfi has no phy, we delete the property "phy-handle" and use
a "fixed-link" property for a xfi port.

Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
---
 board/freescale/b4860qds/eth_b4860qds.c | 38 +++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/board/freescale/b4860qds/eth_b4860qds.c 
b/board/freescale/b4860qds/eth_b4860qds.c
index aa48b5e..595bb4c 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -365,6 +365,11 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, 
phys_addr_t addr,
 {
        int phy;
        char alias[32];
+       struct fixed_link f_link;
+       ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+       u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+
+       prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
 
        if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
                phy = fm_info_get_phy_address(port);
@@ -372,6 +377,39 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, 
phys_addr_t addr,
                sprintf(alias, "phy_sgmii_%x", phy);
                fdt_set_phy_handle(fdt, compat, addr, alias);
                fdt_status_okay_by_alias(fdt, alias);
+       } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
+               /* check if it's XFI interface for 10g */
+               switch (prtcl2) {
+               case 0x80:
+               case 0x81:
+               case 0x82:
+               case 0x83:
+               case 0x84:
+               case 0x85:
+               case 0x86:
+               case 0x87:
+               case 0x88:
+               case 0x89:
+               case 0x8a:
+               case 0x8b:
+               case 0x8c:
+               case 0x8d:
+               case 0x8e:
+               case 0xb1:
+               case 0xb2:
+                       f_link.phy_id = port;
+                       f_link.duplex = 1;
+                       f_link.link_speed = 10000;
+                       f_link.pause = 0;
+                       f_link.asym_pause = 0;
+
+                       fdt_delprop(fdt, offset, "phy-handle");
+                       fdt_setprop(fdt, offset, "fixed-link", &f_link,
+                                   sizeof(f_link));
+                       break;
+               default:
+                       break;
+               }
        }
 }
 
-- 
2.1.0.27.g96db324

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to