On Friday, November 07, 2014 at 03:40:00 PM, Lukasz Majewski wrote:
> Hi Marek,
>
> > Add example of an USB UDC configuration with DFU and UMS.
> >
> > Signed-off-by: Marek Vasut <ma...@denx.de>
> > Cc: Chin Liang See <cl...@altera.com>
> > Cc: Dinh Nguyen <dingu...@opensource.altera.com>
> > Cc: Vince Bridgers <vbrid...@altera.com>
> > Cc: Pavel Machek <pa...@denx.de>
> > Cc: Stefan Roese <s...@denx.de>
> > Cc: Lukasz Majewski <l.majew...@samsung.com>
> > ---
> >
> > board/altera/socfpga/socfpga_cyclone5.c | 21 +++++++++++++++++++++
> > include/configs/socfpga_common.h | 30
> >
> > +++++++++++++++++++++++++++++- 2 files changed, 50 insertions(+), 1
> > deletion(-)
> >
> > diff --git a/board/altera/socfpga/socfpga_cyclone5.c
> > b/board/altera/socfpga/socfpga_cyclone5.c index 0f81d89..ce625e5
> > 100644 --- a/board/altera/socfpga/socfpga_cyclone5.c
> > +++ b/board/altera/socfpga/socfpga_cyclone5.c
> > @@ -8,6 +8,10 @@
> >
> > #include <asm/arch/reset_manager.h>
> > #include <asm/io.h>
> >
> > +#include <usb.h>
> > +#include <usb/s3c_udc.h>
> > +#include <usb_mass_storage.h>
> > +
> >
> > #include <netdev.h>
> >
> > DECLARE_GLOBAL_DATA_PTR;
> >
> > @@ -39,3 +43,20 @@ int board_init(void)
> >
> > return 0;
> >
> > }
> >
> > +
> > +#ifdef CONFIG_USB_GADGET
> > +struct s3c_plat_otg_data socfpga_otg_data = {
> > + .regs_otg = CONFIG_USB_DWC2_REG_ADDR,
> > + .usb_gusbcfg = 0x1417,
> > +};
> > +
> > +int board_usb_init(int index, enum usb_init_type init)
> > +{
> > + return s3c_udc_probe(&socfpga_otg_data);
> > +}
> > +
> > +int g_dnl_board_usb_cable_connected(void)
> > +{
> > + return 1;
> > +}
> > +#endif
> > diff --git a/include/configs/socfpga_common.h
> > b/include/configs/socfpga_common.h index 1df886b..9823be6 100644
> > --- a/include/configs/socfpga_common.h
> > +++ b/include/configs/socfpga_common.h
> > @@ -37,7 +37,7 @@
> >
> > */
> >
> > #define CONFIG_NR_DRAM_BANKS 1
> > #define PHYS_SDRAM_1 0x0
> >
> > -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
> > +#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
> >
> > #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
> > #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
> >
> > @@ -191,6 +191,34 @@
> >
> > #endif
> >
> > /*
> >
> > + * USB Gadget (DFU, UMS)
> > + */
> > +#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
> > +#define CONFIG_USB_GADGET
> > +#define CONFIG_USB_GADGET_S3C_UDC_OTG
> > +#define CONFIG_USB_GADGET_DUALSPEED
> > +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> > +
> > +/* USB Composite download gadget - g_dnl */
> > +#define CONFIG_USBDOWNLOAD_GADGET
> > +#define CONFIG_USB_GADGET_MASS_STORAGE
> > +
> > +#define CONFIG_DFU_FUNCTION
> > +#define CONFIG_DFU_MMC
> > +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024)
> > +#define DFU_DEFAULT_POLL_TIMEOUT 300
> > +
> > +/* USB IDs */
> > +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /*
> > NetChip */ +#define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /*
> > Linux-USB File-backed Storage Gadget */ +#define
> > CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define
> > CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM +#ifndef
> > CONFIG_G_DNL_MANUFACTURER +#define
> > CONFIG_G_DNL_MANUFACTURER "Altera" +#endif
> > +#endif
> > +
> > +/*
> >
> > * U-Boot environment
> > */
> >
> > #define CONFIG_SYS_CONSOLE_IS_IN_ENV
>
> Reviewed-by: Lukasz Majewski <l.majew...@samsung.com>
> Tested-by: Lukasz Majewski <l.majew...@samsung.com>
Queued for master, thanks!
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
