Enable support for the DW master SPI controller in the config header for the SoCFPGA. This controller can only be enabled, if DT support is enabled.
Signed-off-by: Stefan Roese <s...@denx.de> Cc: Chin Liang See <cl...@altera.com> Cc: Dinh Nguyen <dingu...@altera.com> Cc: Vince Bridgers <vbrid...@altera.com> Cc: Marek Vasut <ma...@denx.de> Cc: Pavel Machek <pa...@denx.de> --- include/configs/socfpga_common.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 9fc4212..830b956 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -191,6 +191,18 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #define CONFIG_CMD_SF #endif +#ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */ +#define CONFIG_CMD_DM +#define CONFIG_DM +#define CONFIG_DM_SPI +#define CONFIG_DESIGNWARE_SPI +#ifndef __ASSEMBLY__ +unsigned int cm_get_spi_controller_clk_hz(void); +#define CONFIG_DW_SPI_REF_CLK cm_get_spi_controller_clk_hz() +#endif +#define CONFIG_CMD_SPI +#endif + /* * Serial Driver */ -- 2.1.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
