Hi Fabio, The SPL support that I have done for sabresd is not %100 done. I just did that for the testing and to see if I could load the SPL image.
Btw, I saw in freescale repository that they have the plugin feature. I enabled it but it didn't work. When I load the image, it jump to 0x00907000. Do you know how does it work?. Regards, john On Wed, Nov 5, 2014 at 3:02 AM, Fabio Estevam <feste...@gmail.com> wrote: > Hi John, > > On Wed, Nov 5, 2014 at 12:58 AM, John Tobias <john.tobias...@gmail.com> wrote: >> Hi All, >> >> I ported the SPL features of u-boot into iMX6 SabreSD. I was able to >> load the SPL image and configure the DDR correctly. > > Cool, could you please submit this patch adding spl support to mx6 sabresd? > > I will start working on spl for mx6 and your patch would be very helpful. > >> Then, I ported it again on iMX6SL-evk, unfortunately, I did not get >> any data on my serial port window. >> I played with some different values for CCM_CCGR0 - CCM_CCGR6 and >> still not getting data. I am not sure exactly what are the big >> difference between the ROM code of the two chips and why it didn't >> work. >> >> Does anyone could tell me what may be the possible problem?. > > Please post a patch adding spl support for mx6sl evk (marked as RFC), > so that we can try to spot some potential issues. Please add on Cc > some of the folks that have previously worked with mx6 spl, so that > they could help reviewing it. > > Thanks, > > Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot