On 14-11-05 11:09 AM, Wolfgang Denk wrote:
Dear Steve,
In message <545a74e6.5010...@broadcom.com> you wrote:
In my experience, we would normally set the CROSS_COMPILE variable to
the "prefix" of the cross compiler toolchain, for example:
CROSS_COMPILE=/opt/eldk-5.4/armv7a/sysroots/i686-eldk-linux/usr/bin/armv7a-vfp-neon-linux-gnueabi/arm-linux-gnueabi-
Actually we should have only
CROSS_COMPILE=arm-linux-gnueabi-
and make the PATH take care of where to pick the tools from.
Best regards,
Wolfgang Denk
Actually, that would be unfortunate, because I currently have:
- /usr/bin/arm-linux-gnueabi-gcc
-
/opt/eldk-5.4/armv7a/sysroots/i686-eldk-linux/usr/bin/armv7a-vfp-neon-linux-gnueabi/arm-linux-gnueabi-gcc
- (and others)
installed on my machine....
If $PATH" was to "take care of it", then somehow $PATH would need to be
constantly "rearranged" so that the desired compiler is selected correctly.
IMO it would be best to specify the "absolute path to the prefix"
completely, and not rely on PATH at all!
Thanks, Steve
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
