Include a weak function board_ehci_usb_mode to gives board code
a choice. If the board want the otg port work in host mode but not
device mode, this should be handled.
Signed-off-by: Peng Fan <peng....@freescale.com>
Signed-off-by: Ye Li <b37...@freescale.com>
---
Changes v2:
Introduce a new weak function to let board have a choice to decide which mode
to work at.
drivers/usb/host/ehci-mx6.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 9ec5a0a..3662a80 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -193,6 +193,11 @@ static void usb_oc_config(int index)
__raw_writel(val, ctrl);
}
+int __weak board_ehci_usb_mode(int index, enum usb_init_type *type)
+{
+ return 0;
+}
+
int __weak board_ehci_hcd_init(int port)
{
return 0;
@@ -223,6 +228,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
usb_internal_phy_clock_gate(index, 1);
type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST;
+ board_ehci_usb_mode(index, &type);
+
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
--
1.8.4.5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
