Changes v2: - move pinmux setting into board_init - add otg polarity setting in board_ehci_hcd_init - Introduce a new weak function to give board a choice to decide the work mode of the otg port, since a otg port can also work in host mode without touch ID pin.
Peng Fan (3): usb:ehci-mx6 add board_ehci_usb_mode function imx:mx6sxsabresd add usb support imx:mx6slevk add usb support arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 5 +++ board/freescale/mx6slevk/mx6slevk.c | 51 +++++++++++++++++++++++++++++ board/freescale/mx6sxsabresd/mx6sxsabresd.c | 51 +++++++++++++++++++++++++++++ drivers/usb/host/ehci-mx6.c | 7 ++++ include/configs/mx6slevk.h | 14 ++++++++ include/configs/mx6sxsabresd.h | 14 ++++++++ 6 files changed, 142 insertions(+) -- 1.8.4.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
