Hi Grzegorz,
> Signed-off-by: Grzegorz Bernacki <g...@semihalf.com>
> ---
> board/digsy_mtc/digsy_mtc.c | 14 ++++++++++++++
> include/configs/digsy_mtc.h | 7 +++++++
> 2 files changed, 21 insertions(+), 0 deletions(-)
>
> diff --git a/board/digsy_mtc/digsy_mtc.c b/board/digsy_mtc/digsy_mtc.c
> index 83d5864..36bbbc5 100644
> --- a/board/digsy_mtc/digsy_mtc.c
> +++ b/board/digsy_mtc/digsy_mtc.c
> @@ -186,6 +186,10 @@ int checkboard(void)
>
> int board_early_init_r(void)
> {
> +#ifdef CONFIG_MPC52XX_SPI
> + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
> + struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt*)MPC5XXX_GPT;
> +#endif
> /*
> * Now, when we are in RAM, enable flash write access for detection
> * process. Note that CS_BOOT cannot be cleared when executing in
> @@ -202,6 +206,16 @@ int board_early_init_r(void)
> /* Low level USB init, required for proper kernel operation */
> usb_cpu_init();
> #endif
> +#ifdef CONFIG_MPC52XX_SPI
> + /* SPI on Tmr2/3/4/5 pins */
> + gpio->port_config |= 0x20000000;
> +
> + /* GPT 6 Output Enable */
> + gpt[6].emsr = 0x00000034 ;
> + /* GPT 7 Output Enable */
> + gpt[7].emsr = 0x00000034 ;
> +#endif
You want to use accessor macros here.
Cheers
Detlev
--
The latest code looks a bit similar to the old [linux] big-reader-locks hack
(which got dropped for good many eons ago and with which i deny any involvement
with, such as having authored it. [oh, did i say that out loud? crap.]), imple-
mented cleanly and properly. -- Ingo Molnar <20090428124033.ga1...@elte.hu>
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
