Hi Matthias, On Thursday 04 June 2009 19:40:19 Matthias Fuchs wrote: > doen't it make sense to use/extend the code from > board/esd/common/cmd_loadpci.c in stead it copying this code? Even that > code is running on 4xx only, it should be simple to modify it for cpci750. > Adding support for bootvx should be simple also.
I thought about this too but didn't do it mainly because of those reasons: a) As you already mentioned the current code in common is 4xx specific. b) The parameters used to identify the image type are incompatible on both platforms. "1" is used for booting a script on 4xx and VxWorks on CPCI750. c) I have no means of testing any changes in this code on 4xx and/or 750. So if you still think this should be unified then I need your assistance here. You would need to help me testing those changes on both platforms. Please let me know if you can do this. Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
