The DM9000 was hard-coded to only support one DM9000 device. This patch
adds a new initialization function - dm9000_initialize_ex() - to support
registering multiple (and possibly dynamic) numbers of dm9000 devices.
This patch consists of:
* Change the board_info struct to a private struct under eth_device.
* Add io address/data address/srom availability information to this
private struct.
* Replace all uses of DM9000_IO/DM9000_DATA with new members, ensure
that the eth_device struct propagates down to all helper functions.
* Make dm9000_initialize() call dm9000_initialize_ex() with filled
in information from the old preprocessor symbols (DM9000_IO,
DM9000_DATA, etc.)
Overall the following parameters have been moved over to being a
per-chip setting:
DM9000_IO, DM9000_DATA, CONFIG_DM9000_NO_SROM
while the following is still a global setting affecting all chips:
CONFIG_DM9000_BYTE_SWAPPED
And the following has been removed entirely:
CONFIG_DM9000_BASE (was only used in a single printf)
Signed-off-by: Andrew Ruder <andrew.ru...@elecsyscorp.com>
Cc: Joe Hershberger <joe.hershber...@gmail.com>
---
Maybe a useful exercise anyway, this patch is significantly more messy with all
the whitespace cleanups. See the v1 for the changes without the noise. :)
drivers/net/dm9000x.c | 468 +++++++++++++++++++++++++++++---------------------
include/netdev.h | 1 +
2 files changed, 269 insertions(+), 200 deletions(-)
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 230f368..89528a8 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -29,7 +29,7 @@ v1.2 03/18/2003 Weilun Huang
<weilun_hu...@davicom.com.tw>:
--------------------------------------
12/15/2003 Initial port to u-boot by
- Sascha Hauer <saschaha...@web.de>
+ Sascha Hauer <saschaha...@web.de>
06/03/2008 Remy Bohmer <li...@bohmer.net>
- Fixed the driver to work with DM9000A.
@@ -55,6 +55,7 @@ TODO: external MII is not functional, only internal at the
moment.
#include <net.h>
#include <asm/io.h>
#include <dm9000.h>
+#include <malloc.h>
#include "dm9000x.h"
@@ -63,24 +64,26 @@ TODO: external MII is not functional, only internal at the
moment.
/* #define CONFIG_DM9000_DEBUG */
#ifdef CONFIG_DM9000_DEBUG
-#define DM9000_DBG(fmt,args...) printf(fmt, ##args)
-#define DM9000_DMP_PACKET(func,packet,length) \
+#define DM9000_DBG(fmt, args...) printf(fmt, ##args)
+#define DM9000_DMP_PACKET(func, packet, length) \
do { \
- int i; \
+ int i; \
printf("%s: length: %d\n", func, length); \
for (i = 0; i < length; i++) { \
if (i % 8 == 0) \
printf("\n%s: %02x: ", func, i); \
- printf("%02x ", ((unsigned char *) packet)[i]); \
+ printf("%02x ", ((unsigned char *)packet)[i]); \
} printf("\n"); \
- } while(0)
+ } while (0)
#else
-#define DM9000_DBG(fmt,args...)
-#define DM9000_DMP_PACKET(func,packet,length)
+#define DM9000_DBG(fmt, args...) do {} while (0)
+#define DM9000_DMP_PACKET(func, packet, length) do {} while (0)
#endif
/* Structure/enum declaration ------------------------------- */
-typedef struct board_info {
+struct dm9000_priv {
+ ulong data_base;
+ ulong io_base;
u32 runt_length_counter; /* counter: RX length < 64byte */
u32 long_length_counter; /* counter: RX length > 1514byte */
u32 reset_counter; /* counter: RESET */
@@ -89,32 +92,31 @@ typedef struct board_info {
u16 tx_pkt_cnt;
u16 queue_start_addr;
u16 dbug_cnt;
+ u8 has_srom;
u8 phy_addr;
u8 device_wait_reset; /* device state */
unsigned char srom[128];
- void (*outblk)(volatile void *data_ptr, int count);
- void (*inblk)(void *data_ptr, int count);
- void (*rx_status)(u16 *RxStatus, u16 *RxLen);
- struct eth_device netdev;
-} board_info_t;
-static board_info_t dm9000_info;
+ void (*outblk)(struct eth_device *dev, void *data_ptr, int count);
+ void (*inblk)(struct eth_device *dev, void *data_ptr, int count);
+ void (*rx_status)(struct eth_device *dev, u16 *rxstatus, u16 *rxlen);
+};
/* function declaration ------------------------------------- */
-static int dm9000_probe(void);
-static u16 dm9000_phy_read(int);
-static void dm9000_phy_write(int, u16);
-static u8 DM9000_ior(int);
-static void DM9000_iow(int reg, u8 value);
+static int dm9000_probe(struct eth_device *);
+static u16 dm9000_phy_read(struct eth_device *, int);
+static void dm9000_phy_write(struct eth_device *, int, u16);
+static u8 DM9000_ior(struct eth_device *, int);
+static void DM9000_iow(struct eth_device *, int reg, u8 value);
/* DM9000 network board routine ---------------------------- */
#ifndef CONFIG_DM9000_BYTE_SWAPPED
-#define DM9000_outb(d,r) writeb(d, (volatile u8 *)(r))
-#define DM9000_outw(d,r) writew(d, (volatile u16 *)(r))
-#define DM9000_outl(d,r) writel(d, (volatile u32 *)(r))
-#define DM9000_inb(r) readb((volatile u8 *)(r))
-#define DM9000_inw(r) readw((volatile u16 *)(r))
-#define DM9000_inl(r) readl((volatile u32 *)(r))
+#define DM9000_outb(d, r) writeb(d, (u8 *)(r))
+#define DM9000_outw(d, r) writew(d, (u16 *)(r))
+#define DM9000_outl(d, r) writel(d, (u32 *)(r))
+#define DM9000_inb(r) readb((u8 *)(r))
+#define DM9000_inw(r) readw((u16 *)(r))
+#define DM9000_inl(r) readl((u32 *)(r))
#else
#define DM9000_outb(d, r) __raw_writeb(d, r)
#define DM9000_outw(d, r) __raw_writew(d, r)
@@ -125,126 +127,149 @@ static void DM9000_iow(int reg, u8 value);
#endif
#ifdef CONFIG_DM9000_DEBUG
+static void dump_regs(struct eth_device *dev) __attribute__ ((unused));
static void
-dump_regs(void) __attribute__ ((unused))
+dump_regs(struct eth_device *dev)
{
DM9000_DBG("\n");
- DM9000_DBG("NCR (0x00): %02x\n", DM9000_ior(0));
- DM9000_DBG("NSR (0x01): %02x\n", DM9000_ior(1));
- DM9000_DBG("TCR (0x02): %02x\n", DM9000_ior(2));
- DM9000_DBG("TSRI (0x03): %02x\n", DM9000_ior(3));
- DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(4));
- DM9000_DBG("RCR (0x05): %02x\n", DM9000_ior(5));
- DM9000_DBG("RSR (0x06): %02x\n", DM9000_ior(6));
- DM9000_DBG("ISR (0xFE): %02x\n", DM9000_ior(DM9000_ISR));
+ DM9000_DBG("NCR (0x00): %02x\n", DM9000_ior(dev, 0));
+ DM9000_DBG("NSR (0x01): %02x\n", DM9000_ior(dev, 1));
+ DM9000_DBG("TCR (0x02): %02x\n", DM9000_ior(dev, 2));
+ DM9000_DBG("TSRI (0x03): %02x\n", DM9000_ior(dev, 3));
+ DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(dev, 4));
+ DM9000_DBG("RCR (0x05): %02x\n", DM9000_ior(dev, 5));
+ DM9000_DBG("RSR (0x06): %02x\n", DM9000_ior(dev, 6));
+ DM9000_DBG("ISR (0xFE): %02x\n", DM9000_ior(dev, DM9000_ISR));
DM9000_DBG("\n");
}
#endif
-static void dm9000_outblk_8bit(volatile void *data_ptr, int count)
+static void
+dm9000_outblk_8bit(struct eth_device *dev, void *data_ptr, int count)
{
int i;
+ struct dm9000_priv *priv = dev->priv;
for (i = 0; i < count; i++)
- DM9000_outb((((u8 *) data_ptr)[i] & 0xff), DM9000_DATA);
+ DM9000_outb((((u8 *)data_ptr)[i] & 0xff), priv->data_base);
}
-static void dm9000_outblk_16bit(volatile void *data_ptr, int count)
+static void
+dm9000_outblk_16bit(struct eth_device *dev, void *data_ptr, int count)
{
int i;
u32 tmplen = (count + 1) / 2;
+ struct dm9000_priv *priv = dev->priv;
for (i = 0; i < tmplen; i++)
- DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
+ DM9000_outw(((u16 *)data_ptr)[i], priv->data_base);
}
-static void dm9000_outblk_32bit(volatile void *data_ptr, int count)
+static void
+dm9000_outblk_32bit(struct eth_device *dev, void *data_ptr, int count)
{
int i;
u32 tmplen = (count + 3) / 4;
+ struct dm9000_priv *priv = dev->priv;
for (i = 0; i < tmplen; i++)
- DM9000_outl(((u32 *) data_ptr)[i], DM9000_DATA);
+ DM9000_outl(((u32 *)data_ptr)[i], priv->data_base);
}
-static void dm9000_inblk_8bit(void *data_ptr, int count)
+static void
+dm9000_inblk_8bit(struct eth_device *dev, void *data_ptr, int count)
{
int i;
+ struct dm9000_priv *priv = dev->priv;
+
for (i = 0; i < count; i++)
- ((u8 *) data_ptr)[i] = DM9000_inb(DM9000_DATA);
+ ((u8 *)data_ptr)[i] = DM9000_inb(priv->data_base);
}
-static void dm9000_inblk_16bit(void *data_ptr, int count)
+static void
+dm9000_inblk_16bit(struct eth_device *dev, void *data_ptr, int count)
{
int i;
u32 tmplen = (count + 1) / 2;
+ struct dm9000_priv *priv = dev->priv;
for (i = 0; i < tmplen; i++)
- ((u16 *) data_ptr)[i] = DM9000_inw(DM9000_DATA);
+ ((u16 *)data_ptr)[i] = DM9000_inw(priv->data_base);
}
-static void dm9000_inblk_32bit(void *data_ptr, int count)
+static void
+dm9000_inblk_32bit(struct eth_device *dev, void *data_ptr, int count)
{
int i;
u32 tmplen = (count + 3) / 4;
+ struct dm9000_priv *priv = dev->priv;
for (i = 0; i < tmplen; i++)
- ((u32 *) data_ptr)[i] = DM9000_inl(DM9000_DATA);
+ ((u32 *)data_ptr)[i] = DM9000_inl(priv->data_base);
}
-static void dm9000_rx_status_32bit(u16 *RxStatus, u16 *RxLen)
+static void
+dm9000_rx_status_32bit(struct eth_device *dev, u16 *rxstatus, u16 *rxlen)
{
u32 tmpdata;
+ struct dm9000_priv *priv = dev->priv;
- DM9000_outb(DM9000_MRCMD, DM9000_IO);
+ DM9000_outb(DM9000_MRCMD, priv->io_base);
- tmpdata = DM9000_inl(DM9000_DATA);
- *RxStatus = __le16_to_cpu(tmpdata);
- *RxLen = __le16_to_cpu(tmpdata >> 16);
+ tmpdata = DM9000_inl(priv->data_base);
+ *rxstatus = __le16_to_cpu(tmpdata);
+ *rxlen = __le16_to_cpu(tmpdata >> 16);
}
-static void dm9000_rx_status_16bit(u16 *RxStatus, u16 *RxLen)
+static void
+dm9000_rx_status_16bit(struct eth_device *dev, u16 *rxstatus, u16 *rxlen)
{
- DM9000_outb(DM9000_MRCMD, DM9000_IO);
+ struct dm9000_priv *priv = dev->priv;
+
+ DM9000_outb(DM9000_MRCMD, priv->io_base);
- *RxStatus = __le16_to_cpu(DM9000_inw(DM9000_DATA));
- *RxLen = __le16_to_cpu(DM9000_inw(DM9000_DATA));
+ *rxstatus = __le16_to_cpu(DM9000_inw(priv->data_base));
+ *rxlen = __le16_to_cpu(DM9000_inw(priv->data_base));
}
-static void dm9000_rx_status_8bit(u16 *RxStatus, u16 *RxLen)
+static void
+dm9000_rx_status_8bit(struct eth_device *dev, u16 *rxstatus, u16 *rxlen)
{
- DM9000_outb(DM9000_MRCMD, DM9000_IO);
-
- *RxStatus =
- __le16_to_cpu(DM9000_inb(DM9000_DATA) +
- (DM9000_inb(DM9000_DATA) << 8));
- *RxLen =
- __le16_to_cpu(DM9000_inb(DM9000_DATA) +
- (DM9000_inb(DM9000_DATA) << 8));
+ struct dm9000_priv *priv = dev->priv;
+
+ DM9000_outb(DM9000_MRCMD, priv->io_base);
+
+ *rxstatus =
+ __le16_to_cpu(DM9000_inb(priv->data_base) +
+ (DM9000_inb(priv->data_base) << 8));
+ *rxlen =
+ __le16_to_cpu(DM9000_inb(priv->data_base) +
+ (DM9000_inb(priv->data_base) << 8));
}
/*
Search DM9000 board, allocate space and register it
*/
int
-dm9000_probe(void)
+dm9000_probe(struct eth_device *dev)
{
+ struct dm9000_priv *priv = dev->priv;
u32 id_val;
- id_val = DM9000_ior(DM9000_VIDL);
- id_val |= DM9000_ior(DM9000_VIDH) << 8;
- id_val |= DM9000_ior(DM9000_PIDL) << 16;
- id_val |= DM9000_ior(DM9000_PIDH) << 24;
+ id_val = DM9000_ior(dev, DM9000_VIDL);
+ id_val |= DM9000_ior(dev, DM9000_VIDH) << 8;
+ id_val |= DM9000_ior(dev, DM9000_PIDL) << 16;
+ id_val |= DM9000_ior(dev, DM9000_PIDH) << 24;
if (id_val == DM9000_ID) {
- printf("dm9000 i/o: 0x%x, id: 0x%x \n", CONFIG_DM9000_BASE,
+ printf("dm9000 i/o: 0x%lx, id: 0x%x\n", priv->io_base,
id_val);
return 0;
} else {
- printf("dm9000 not found at 0x%08x id: 0x%08x\n",
- CONFIG_DM9000_BASE, id_val);
+ printf("dm9000 not found at 0x%08lx id: 0x%08x\n",
+ priv->io_base, id_val);
return -1;
}
}
/* General Purpose dm9000 reset routine */
static void
-dm9000_reset(void)
+dm9000_reset(struct eth_device *dev)
{
DM9000_DBG("resetting DM9000\n");
@@ -252,28 +277,29 @@ dm9000_reset(void)
see DM9000 Application Notes V1.22 Jun 11, 2004 page 29 */
/* DEBUG: Make all GPIO0 outputs, all others inputs */
- DM9000_iow(DM9000_GPCR, GPCR_GPIO0_OUT);
+ DM9000_iow(dev, DM9000_GPCR, GPCR_GPIO0_OUT);
/* Step 1: Power internal PHY by writing 0 to GPIO0 pin */
- DM9000_iow(DM9000_GPR, 0);
+ DM9000_iow(dev, DM9000_GPR, 0);
/* Step 2: Software reset */
- DM9000_iow(DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST));
+ DM9000_iow(dev, DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST));
do {
DM9000_DBG("resetting the DM9000, 1st reset\n");
udelay(25); /* Wait at least 20 us */
- } while (DM9000_ior(DM9000_NCR) & 1);
+ } while (DM9000_ior(dev, DM9000_NCR) & 1);
- DM9000_iow(DM9000_NCR, 0);
- DM9000_iow(DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST)); /* Issue a second
reset */
+ DM9000_iow(dev, DM9000_NCR, 0);
+ /* Issue a second reset */
+ DM9000_iow(dev, DM9000_NCR, (NCR_LBK_INT_MAC | NCR_RST));
do {
DM9000_DBG("resetting the DM9000, 2nd reset\n");
udelay(25); /* Wait at least 20 us */
- } while (DM9000_ior(DM9000_NCR) & 1);
+ } while (DM9000_ior(dev, DM9000_NCR) & 1);
/* Check whether the ethernet controller is present */
- if ((DM9000_ior(DM9000_PIDL) != 0x0) ||
- (DM9000_ior(DM9000_PIDH) != 0x90))
+ if ((DM9000_ior(dev, DM9000_PIDL) != 0x0) ||
+ (DM9000_ior(dev, DM9000_PIDH) != 0x90))
printf("ERROR: resetting DM9000 -> not responding\n");
}
@@ -283,63 +309,63 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
{
int i, oft, lnk;
u8 io_mode;
- struct board_info *db = &dm9000_info;
+ struct dm9000_priv *priv = dev->priv;
DM9000_DBG("%s\n", __func__);
/* RESET device */
- dm9000_reset();
+ dm9000_reset(dev);
- if (dm9000_probe() < 0)
+ if (dm9000_probe(dev) < 0)
return -1;
/* Auto-detect 8/16/32 bit mode, ISR Bit 6+7 indicate bus width */
- io_mode = DM9000_ior(DM9000_ISR) >> 6;
+ io_mode = DM9000_ior(dev, DM9000_ISR) >> 6;
switch (io_mode) {
case 0x0: /* 16-bit mode */
printf("DM9000: running in 16 bit mode\n");
- db->outblk = dm9000_outblk_16bit;
- db->inblk = dm9000_inblk_16bit;
- db->rx_status = dm9000_rx_status_16bit;
+ priv->outblk = dm9000_outblk_16bit;
+ priv->inblk = dm9000_inblk_16bit;
+ priv->rx_status = dm9000_rx_status_16bit;
break;
case 0x01: /* 32-bit mode */
printf("DM9000: running in 32 bit mode\n");
- db->outblk = dm9000_outblk_32bit;
- db->inblk = dm9000_inblk_32bit;
- db->rx_status = dm9000_rx_status_32bit;
+ priv->outblk = dm9000_outblk_32bit;
+ priv->inblk = dm9000_inblk_32bit;
+ priv->rx_status = dm9000_rx_status_32bit;
break;
case 0x02: /* 8 bit mode */
printf("DM9000: running in 8 bit mode\n");
- db->outblk = dm9000_outblk_8bit;
- db->inblk = dm9000_inblk_8bit;
- db->rx_status = dm9000_rx_status_8bit;
+ priv->outblk = dm9000_outblk_8bit;
+ priv->inblk = dm9000_inblk_8bit;
+ priv->rx_status = dm9000_rx_status_8bit;
break;
default:
/* Assume 8 bit mode, will probably not work anyway */
printf("DM9000: Undefined IO-mode:0x%x\n", io_mode);
- db->outblk = dm9000_outblk_8bit;
- db->inblk = dm9000_inblk_8bit;
- db->rx_status = dm9000_rx_status_8bit;
+ priv->outblk = dm9000_outblk_8bit;
+ priv->inblk = dm9000_inblk_8bit;
+ priv->rx_status = dm9000_rx_status_8bit;
break;
}
/* Program operating register, only internal phy supported */
- DM9000_iow(DM9000_NCR, 0x0);
+ DM9000_iow(dev, DM9000_NCR, 0x0);
/* TX Polling clear */
- DM9000_iow(DM9000_TCR, 0);
+ DM9000_iow(dev, DM9000_TCR, 0);
/* Less 3Kb, 200us */
- DM9000_iow(DM9000_BPTR, BPTR_BPHW(3) | BPTR_JPT_600US);
+ DM9000_iow(dev, DM9000_BPTR, BPTR_BPHW(3) | BPTR_JPT_600US);
/* Flow Control : High/Low Water */
- DM9000_iow(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8));
+ DM9000_iow(dev, DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8));
/* SH FIXME: This looks strange! Flow Control */
- DM9000_iow(DM9000_FCR, 0x0);
+ DM9000_iow(dev, DM9000_FCR, 0x0);
/* Special Mode */
- DM9000_iow(DM9000_SMCR, 0);
+ DM9000_iow(dev, DM9000_SMCR, 0);
/* clear TX status */
- DM9000_iow(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);
+ DM9000_iow(dev, DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END);
/* Clear interrupt status */
- DM9000_iow(DM9000_ISR, ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS);
+ DM9000_iow(dev, DM9000_ISR, ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS);
printf("MAC: %pM\n", dev->enetaddr);
if (!is_valid_ether_addr(dev->enetaddr)) {
@@ -354,23 +380,24 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
/* fill device MAC address registers */
for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
- DM9000_iow(oft, dev->enetaddr[i]);
+ DM9000_iow(dev, oft, dev->enetaddr[i]);
for (i = 0, oft = 0x16; i < 8; i++, oft++)
- DM9000_iow(oft, 0xff);
+ DM9000_iow(dev, oft, 0xff);
/* read back mac, just to be sure */
for (i = 0, oft = 0x10; i < 6; i++, oft++)
- DM9000_DBG("%02x:", DM9000_ior(oft));
+ DM9000_DBG("%02x:", DM9000_ior(dev, oft));
DM9000_DBG("\n");
/* Activate DM9000 */
/* RX enable */
- DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);
+ DM9000_iow(dev, DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);
/* Enable TX/RX interrupt mask */
- DM9000_iow(DM9000_IMR, IMR_PAR);
+ DM9000_iow(dev, DM9000_IMR, IMR_PAR);
i = 0;
- while (!(dm9000_phy_read(1) & 0x20)) { /* autonegation complete bit */
+ while (!(dm9000_phy_read(dev, 1) & 0x20)) {
+ /* autonegotiation complete bit */
udelay(1000);
i++;
if (i == 10000) {
@@ -380,7 +407,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
}
/* see what we've got */
- lnk = dm9000_phy_read(17) >> 12;
+ lnk = dm9000_phy_read(dev, 17) >> 12;
printf("operating at ");
switch (lnk) {
case 1:
@@ -407,38 +434,38 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
Hardware start transmission.
Send a packet to media from the upper layer.
*/
-static int dm9000_send(struct eth_device *netdev, void *packet, int length)
+static int dm9000_send(struct eth_device *dev, void *packet, int length)
{
int tmo;
- struct board_info *db = &dm9000_info;
+ struct dm9000_priv *priv = dev->priv;
DM9000_DMP_PACKET(__func__ , packet, length);
- DM9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
+ DM9000_iow(dev, DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
/* Move data to DM9000 TX RAM */
- DM9000_outb(DM9000_MWCMD, DM9000_IO); /* Prepare for TX-data */
+ DM9000_outb(DM9000_MWCMD, priv->io_base); /* Prepare for TX-data */
/* push the data to the TX-fifo */
- (db->outblk)(packet, length);
+ (priv->outblk)(dev, packet, length);
/* Set TX length to DM9000 */
- DM9000_iow(DM9000_TXPLL, length & 0xff);
- DM9000_iow(DM9000_TXPLH, (length >> 8) & 0xff);
+ DM9000_iow(dev, DM9000_TXPLL, length & 0xff);
+ DM9000_iow(dev, DM9000_TXPLH, (length >> 8) & 0xff);
/* Issue TX polling command */
- DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
+ DM9000_iow(dev, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
/* wait for end of transmission */
tmo = get_timer(0) + 5 * CONFIG_SYS_HZ;
- while ( !(DM9000_ior(DM9000_NSR) & (NSR_TX1END | NSR_TX2END)) ||
- !(DM9000_ior(DM9000_ISR) & IMR_PTM) ) {
+ while (!(DM9000_ior(dev, DM9000_NSR) & (NSR_TX1END | NSR_TX2END)) ||
+ !(DM9000_ior(dev, DM9000_ISR) & IMR_PTM)) {
if (get_timer(0) >= tmo) {
printf("transmission timeout\n");
break;
}
}
- DM9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
+ DM9000_iow(dev, DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
DM9000_DBG("transmit done\n\n");
return 0;
@@ -448,47 +475,50 @@ static int dm9000_send(struct eth_device *netdev, void
*packet, int length)
Stop the interface.
The interface is stopped when it is brought.
*/
-static void dm9000_halt(struct eth_device *netdev)
+static void dm9000_halt(struct eth_device *dev)
{
DM9000_DBG("%s\n", __func__);
/* RESET devie */
- dm9000_phy_write(0, 0x8000); /* PHY RESET */
- DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */
- DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */
- DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */
+ dm9000_phy_write(dev, 0, 0x8000); /* PHY RESET */
+ DM9000_iow(dev, DM9000_GPR, 0x01); /* Power-Down PHY */
+ DM9000_iow(dev, DM9000_IMR, 0x80); /* Disable all interrupt */
+ DM9000_iow(dev, DM9000_RCR, 0x00); /* Disable RX */
}
/*
Received a packet and pass to upper layer
*/
-static int dm9000_rx(struct eth_device *netdev)
+static int dm9000_rx(struct eth_device *dev)
{
- u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
- u16 RxStatus, RxLen = 0;
- struct board_info *db = &dm9000_info;
+ u8 rxbyte, *rdptr = (u8 *)NetRxPackets[0];
+ u16 rxstatus, rxlen = 0;
+ struct dm9000_priv *priv = dev->priv;
/* Check packet ready or not, we must check
the ISR status first for DM9000A */
- if (!(DM9000_ior(DM9000_ISR) & 0x01)) /* Rx-ISR bit must be set. */
+ if (!(DM9000_ior(dev, DM9000_ISR) & 0x01)) /* Rx-ISR bit must be set. */
return 0;
- DM9000_iow(DM9000_ISR, 0x01); /* clear PR status latched in bit 0 */
+ /* clear PR status latched in bit 0 */
+ DM9000_iow(dev, DM9000_ISR, 0x01);
/* There is _at least_ 1 package in the fifo, read them all */
for (;;) {
- DM9000_ior(DM9000_MRCMDX); /* Dummy read */
+ DM9000_ior(dev, DM9000_MRCMDX); /* Dummy read */
/* Get most updated data,
only look at bits 0:1, See application notes DM9000 */
- rxbyte = DM9000_inb(DM9000_DATA) & 0x03;
+ rxbyte = DM9000_inb(priv->data_base) & 0x03;
/* Status check: this byte must be 0 or 1 */
if (rxbyte > DM9000_PKT_RDY) {
- DM9000_iow(DM9000_RCR, 0x00); /* Stop Device */
- DM9000_iow(DM9000_ISR, 0x80); /* Stop INT request */
+ /* Stop Device */
+ DM9000_iow(dev, DM9000_RCR, 0x00);
+ /* Stop INT request */
+ DM9000_iow(dev, DM9000_ISR, 0x80);
printf("DM9000 error: status check fail: 0x%x\n",
- rxbyte);
+ rxbyte);
return 0;
}
@@ -498,34 +528,31 @@ static int dm9000_rx(struct eth_device *netdev)
DM9000_DBG("receiving packet\n");
/* A packet ready now & Get status/length */
- (db->rx_status)(&RxStatus, &RxLen);
+ (priv->rx_status)(dev, &rxstatus, &rxlen);
- DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
+ DM9000_DBG("rx status: 0x%04x rx len: %d\n", rxstatus, rxlen);
/* Move data from DM9000 */
/* Read received packet from RX SRAM */
- (db->inblk)(rdptr, RxLen);
+ (priv->inblk)(dev, rdptr, rxlen);
- if ((RxStatus & 0xbf00) || (RxLen < 0x40)
- || (RxLen > DM9000_PKT_MAX)) {
- if (RxStatus & 0x100) {
+ if ((rxstatus & 0xbf00) || (rxlen < 0x40) ||
+ (rxlen > DM9000_PKT_MAX)) {
+ if (rxstatus & 0x100)
printf("rx fifo error\n");
- }
- if (RxStatus & 0x200) {
+ if (rxstatus & 0x200)
printf("rx crc error\n");
- }
- if (RxStatus & 0x8000) {
+ if (rxstatus & 0x8000)
printf("rx length error\n");
- }
- if (RxLen > DM9000_PKT_MAX) {
+ if (rxlen > DM9000_PKT_MAX) {
printf("rx length too big\n");
- dm9000_reset();
+ dm9000_reset(dev);
}
} else {
- DM9000_DMP_PACKET(__func__ , rdptr, RxLen);
+ DM9000_DMP_PACKET(__func__ , rdptr, rxlen);
DM9000_DBG("passing packet to upper layer\n");
- NetReceive(NetRxPackets[0], RxLen);
+ NetReceive(NetRxPackets[0], rxlen);
}
}
return 0;
@@ -536,69 +563,76 @@ static int dm9000_rx(struct eth_device *netdev)
*/
void dm9000_read_srom_word(struct eth_device *dev, int offset, u8 *to)
{
- (void)dev;
- DM9000_iow(DM9000_EPAR, offset);
- DM9000_iow(DM9000_EPCR, 0x4);
+ DM9000_iow(dev, DM9000_EPAR, offset);
+ DM9000_iow(dev, DM9000_EPCR, 0x4);
udelay(8000);
- DM9000_iow(DM9000_EPCR, 0x0);
- to[0] = DM9000_ior(DM9000_EPDRL);
- to[1] = DM9000_ior(DM9000_EPDRH);
+ DM9000_iow(dev, DM9000_EPCR, 0x0);
+ to[0] = DM9000_ior(dev, DM9000_EPDRL);
+ to[1] = DM9000_ior(dev, DM9000_EPDRH);
}
void dm9000_write_srom_word(struct eth_device *dev, int offset, u16 val)
{
- (void)dev;
- DM9000_iow(DM9000_EPAR, offset);
- DM9000_iow(DM9000_EPDRH, ((val >> 8) & 0xff));
- DM9000_iow(DM9000_EPDRL, (val & 0xff));
- DM9000_iow(DM9000_EPCR, 0x12);
+ DM9000_iow(dev, DM9000_EPAR, offset);
+ DM9000_iow(dev, DM9000_EPDRH, ((val >> 8) & 0xff));
+ DM9000_iow(dev, DM9000_EPDRL, (val & 0xff));
+ DM9000_iow(dev, DM9000_EPCR, 0x12);
udelay(8000);
- DM9000_iow(DM9000_EPCR, 0);
+ DM9000_iow(dev, DM9000_EPCR, 0);
}
static void dm9000_get_enetaddr(struct eth_device *dev)
{
-#if !defined(CONFIG_DM9000_NO_SROM)
- int i;
- for (i = 0; i < 3; i++)
- dm9000_read_srom_word(dev, i, dev->enetaddr + (2 * i));
-#endif
+ struct dm9000_priv *priv = dev->priv;
+ if (priv->has_srom) {
+ int i;
+ for (i = 0; i < 3; i++)
+ dm9000_read_srom_word(dev, i, dev->enetaddr + (2 * i));
+ }
}
/*
Read a byte from I/O port
*/
static u8
-DM9000_ior(int reg)
+DM9000_ior(struct eth_device *dev, int reg)
{
- DM9000_outb(reg, DM9000_IO);
- return DM9000_inb(DM9000_DATA);
+ struct dm9000_priv *priv = dev->priv;
+
+ DM9000_outb(reg, priv->io_base);
+ return DM9000_inb(priv->data_base);
}
/*
Write a byte to I/O port
*/
static void
-DM9000_iow(int reg, u8 value)
+DM9000_iow(struct eth_device *dev, int reg, u8 value)
{
- DM9000_outb(reg, DM9000_IO);
- DM9000_outb(value, DM9000_DATA);
+ struct dm9000_priv *priv = dev->priv;
+
+ DM9000_outb(reg, priv->io_base);
+ DM9000_outb(value, priv->data_base);
}
/*
Read a word from phyxcer
*/
static u16
-dm9000_phy_read(int reg)
+dm9000_phy_read(struct eth_device *dev, int reg)
{
u16 val;
/* Fill the phyxcer register into REG_0C */
- DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
- DM9000_iow(DM9000_EPCR, 0xc); /* Issue phyxcer read command */
- udelay(100); /* Wait read complete */
- DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer read command */
- val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
+ DM9000_iow(dev, DM9000_EPAR, DM9000_PHY | reg);
+ /* Issue phyxcer read command */
+ DM9000_iow(dev, DM9000_EPCR, 0xc);
+ /* Wait read complete */
+ udelay(100);
+ /* Clear phyxcer read command */
+ DM9000_iow(dev, DM9000_EPCR, 0x0);
+ val = (DM9000_ior(dev, DM9000_EPDRH) << 8) |
+ DM9000_ior(dev, DM9000_EPDRL);
/* The read data keeps on REG_0D & REG_0E */
DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val);
@@ -609,35 +643,69 @@ dm9000_phy_read(int reg)
Write a word to phyxcer
*/
static void
-dm9000_phy_write(int reg, u16 value)
+dm9000_phy_write(struct eth_device *dev, int reg, u16 value)
{
-
/* Fill the phyxcer register into REG_0C */
- DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
+ DM9000_iow(dev, DM9000_EPAR, DM9000_PHY | reg);
/* Fill the written data into REG_0D & REG_0E */
- DM9000_iow(DM9000_EPDRL, (value & 0xff));
- DM9000_iow(DM9000_EPDRH, ((value >> 8) & 0xff));
- DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
- udelay(500); /* Wait write complete */
- DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
+ DM9000_iow(dev, DM9000_EPDRL, (value & 0xff));
+ DM9000_iow(dev, DM9000_EPDRH, ((value >> 8) & 0xff));
+ /* Issue phyxcer write command */
+ DM9000_iow(dev, DM9000_EPCR, 0xa);
+ /* Wait write complete */
+ udelay(500);
+ /* Clear phyxcer write command */
+ DM9000_iow(dev, DM9000_EPCR, 0x0);
DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
}
-int dm9000_initialize(bd_t *bis)
+int dm9000_initialize_ex(u8 dev_num, ulong addr, ulong data, u8 has_srom)
{
- struct eth_device *dev = &(dm9000_info.netdev);
+ struct eth_device *dev;
+ struct dm9000_priv *priv;
+
+ priv = malloc(sizeof(*priv));
+ if (!priv)
+ return 1;
+ dev = malloc(sizeof(*dev));
+ if (!dev) {
+ free(priv);
+ return 2;
+ }
- /* Load MAC address from EEPROM */
- dm9000_get_enetaddr(dev);
+ memset(dev, 0, sizeof(*dev));
+ memset(priv, 0, sizeof(*priv));
+ priv->io_base = addr;
+ priv->data_base = data;
+ priv->has_srom = has_srom;
+ dev->priv = priv;
dev->init = dm9000_init;
dev->halt = dm9000_halt;
dev->send = dm9000_send;
dev->recv = dm9000_rx;
- sprintf(dev->name, "dm9000");
+ if (dev_num > 0)
+ sprintf(dev->name, "dm9000-%hu", dev_num);
+ else
+ sprintf(dev->name, "dm9000");
+
+ /* Load MAC address from EEPROM */
+ dm9000_get_enetaddr(dev);
- eth_register(dev);
+ return eth_register(dev);
+}
- return 0;
+int dm9000_initialize(bd_t *bis)
+{
+#if defined(DM9000_IO) && defined(DM9000_DATA)
+#ifdef CONFIG_DM9000_NO_SROM
+ u8 has_srom = 0;
+#else
+ u8 has_srom = 1;
+#endif
+ return dm9000_initialize_ex(0, DM9000_IO, DM9000_DATA, has_srom);
+#else
+ return 1;
+#endif
}
diff --git a/include/netdev.h b/include/netdev.h
index a887bfb..5985516 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -39,6 +39,7 @@ int davinci_emac_initialize(void);
int dc21x4x_initialize(bd_t *bis);
int designware_initialize(ulong base_addr, u32 interface);
int dm9000_initialize(bd_t *bis);
+int dm9000_initialize_ex(u8 dev_num, ulong addr, ulong data, u8 has_srom);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);
int eepro100_initialize(bd_t *bis);
--
2.1.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
