On Wednesday, October 01, 2014 at 10:44:46 PM, Steve Rae wrote: > On 14-10-01 05:13 AM, Marek Vasut wrote: > > On Wednesday, October 01, 2014 at 04:03:21 AM, Eric Nelson wrote: > >> Hi Marek, > >> > >> On 09/30/2014 04:59 PM, Marek Vasut wrote: > >>> On Tuesday, September 30, 2014 at 09:47:07 PM, Eric Nelson wrote: > >>>> Hi Marek, > >>>> > >>>> On 09/30/2014 12:37 PM, Marek Vasut wrote: > >>>>> On Tuesday, September 30, 2014 at 09:05:39 PM, Eric Nelson wrote: > >>>>>> While trying to configure Nitrogen6X boards to use Android Fastboot, > >>>>>> I found a number of places where the implementation doesn't appear > >>>>>> to match the latest host tools on AOSP. > >>>>>> > >>>>>> Eric Nelson (3): > >>>>>> usb: gadget: fastboot: add max-download-size variable > >>>>>> usb: gadget: fastboot: explicitly set radix of maximum download > >>>>>> size usb: gadget: fastboot: terminate commands with NULL > >>>>> > >>>>> Just to make sure, are those fixes for 2014.10 or new stuff for next > >>>>> ? > >>>> > >>>> These patches are against master, but should apply against usb/next > >>>> and dfu/next and "next" is fine for us. > >>> > >>> 3/3 looks like a bugfix though. Is that a bugfix ? > >> > >> I wasn't able to get fastboot to do much of anything without all three. > >> > >> -- lack of max-download-size simply stopped downloads > >> -- the missing radix caused my host to think that the 0x07000000 > >> size (copied from Beagle) was 1.8 MiB instead of 100+ MiB. > >> -- the lack of termination showed up as a request to download > >> a **huge** image when I tried to send u-boot.imx. I think I got > >> lucky that the next characters in the buffer looked like hex digits. > >> > >> I suspect that others are either holding on to some local patches > >> or are perhaps using old versions of the Fastboot host program. > >> > >> After applying all three, I was able to configure for flashing on > >> an MMC device, but I don't have anything configured to use EFI > >> partitions, so there's no immediate route to usage for us. > >> > >> I'd really like to be able to "fastboot flash bootloader u-boot.imx" > >> and program SPI-NOR and also be able to boot a kernel and RAM disk > >> using "fastboot boot uImage uramdisk.img", but neither of them seems > >> very close. The first needs some more structure, and the latter seemed > >> to decide its' own address for the kernel and simply ignore the > >> RAM disk. > >> > >> I have the sense that this code is pretty much a work in progress, > >> but I'd like to hear otherwise from those who have used it. > > > > OK, so let's wait for the others' opinions. > > > > Best regards, > > Marek Vasut > > I would recommend 1/3 & 2/3 for 2014.10 (I'm not certain about 3/3 > because I don't think that it can actually occur on my boards....) > Thanks, Steve
OK, Lukasz, do you want to send me a PR with those two ? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
