Hi, Albert, > On Thu, 18 Sep 2014 13:47:13 +0800, Alison Wang <b18...@freescale.com> > wrote: > > > For the pblimage tool, the SPL image is splitted into 64 byte chunks, > > and PBL needs a command for each piece. In current pblimage structure, > > the size of the SPL image should be a fixed value. Well, for LS102xA > > and some other ARM platforms, the size of the SPL image is changeable. > > So a new image spl/u-boot-spl-pbl-pad.bin is built, and the size of > it > > is a fixed value "CONFIG_SPL_MAX_SIZE". Use it instead of > > spl/u-boot-spl.bin for LS102xA. > > > > CONFIG_SPL_PBL_PAD is used to enable this function. > > > > Signed-off-by: Alison Wang <alison.w...@freescale.com> > > --- > > There is already a CONFIG_SPL_PAD_TO (see ./README). Can you not use > this? > [Alison Wang] I have already used CONFIG_SPL_PAD_TO to determine the offset to which u-boot-spl.pbl should be padded when generating u-boot-with-spl-pbl.bin. Well, I used CONFIG_SPL_MAX_SIZE to determine the size of u-boot-spl-pbl-pad.bin. u-boot-spl-pbl-pad.bin is generated by padding u-boot-spl.bin to CONFIG_SPL_MAX_SIZE.
Best Regards, Alison Wang _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
