Hi Alison,
On Thu, 18 Sep 2014 13:47:14 +0800, Alison Wang <b18...@freescale.com>
wrote:
> For LS102xA, the initialized next_pbl_cmd should be the sum of
> 0x81000000, the lower 24 bits of CONFIG_SPL_TEXT_BASE and
> CONFIG_SPL_MAX_SIZE(0x1a000). The sum is different from PowerPC.
> The PBI CRC command is different from PowerPC too.
> In pblimage tool, add the support for the above two issues.
>
> Signed-off-by: Alison Wang <alison.w...@freescale.com>
> ---
> tools/pblimage.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/tools/pblimage.c b/tools/pblimage.c
> index 6e6e801..152678b 100644
> --- a/tools/pblimage.c
> +++ b/tools/pblimage.c
> @@ -12,6 +12,10 @@
> * Initialize to an invalid value.
> */
> static uint32_t next_pbl_cmd = 0x82000000;
> +static uint32_t pbl_cmd_initaddr = 0x82000000;
> +static uint32_t pbi_crc_cmd1 = 0x13;
> +static uint32_t pbi_crc_cmd2 = 0x80;
> +
> /*
> * need to store all bytes in memory for calculating crc32, then write the
> * bytes to image file for PBL boot.
> @@ -49,7 +53,7 @@ static void init_next_pbl_cmd(FILE *fp_uboot)
> exit(EXIT_FAILURE);
> }
>
> - next_pbl_cmd = 0x82000000 - st.st_size;
> + next_pbl_cmd = pbl_cmd_initaddr - st.st_size;
> }
>
> static void generate_pbl_cmd(void)
> @@ -81,7 +85,7 @@ static void pbl_fget(size_t size, FILE *stream)
> static void load_uboot(FILE *fp_uboot)
> {
> init_next_pbl_cmd(fp_uboot);
> - while (next_pbl_cmd < 0x82000000) {
> + while (next_pbl_cmd < pbl_cmd_initaddr) {
> generate_pbl_cmd();
> pbl_fget(64, fp_uboot);
> }
> @@ -111,6 +115,14 @@ static void pbl_parser(char *name)
> size_t len = 0;
>
> fname = name;
> +
> + if (strstr(fname, "ls102xa")) {
> + next_pbl_cmd = 0x8101a000;
> + pbl_cmd_initaddr = 0x8101a000;
> + pbi_crc_cmd1 = 0x61;
> + pbi_crc_cmd2 = 0;
> + }
Basing the tool's behaviour on the file name is not a good approach
IMO. Can't we add some command line option to the tool to select the
right set of values?
> fd = fopen(name, "r");
> if (fd == NULL) {
> printf("Error:%s - Can't open\n", fname);
> @@ -172,8 +184,8 @@ static void add_end_cmd(void)
>
> /* Add PBI CRC command. */
> *pmem_buf++ = 0x08;
> - *pmem_buf++ = 0x13;
> - *pmem_buf++ = 0x80;
> + *pmem_buf++ = pbi_crc_cmd1;
> + *pmem_buf++ = pbi_crc_cmd2;
> *pmem_buf++ = 0x40;
> pbl_size += 4;
>
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
