On Wednesday, September 17, 2014 at 01:29:15 PM, Chin Liang See wrote: [...] > A quick test from my side and result as below: > > 1. SDRAM access is working where I can read and write to few spots. :) > > SOCFPGA_CYCLONE5 # md 0 > 00000000: 00000000 aaaaaaaa aaaaaaaa aaaaaaaa ................ > SOCFPGA_CYCLONE5 # mw 0 12345678 100 > SOCFPGA_CYCLONE5 # md 0 > 00000000: 12345678 12345678 12345678 12345678 xV4.xV4.xV4.xV4. > SOCFPGA_CYCLONE5 # md 100000 > 00100000: eafffffd fbff4b3f fffffffe fdff33be ....?K.......3.. > SOCFPGA_CYCLONE5 # mw 100000 23456789 100 > SOCFPGA_CYCLONE5 # md 100000 > 00100000: 23456789 23456789 23456789 23456789 .gE#.gE#.gE#.gE# > SOCFPGA_CYCLONE5 #
What does that mean? > 2. Ethernet seems not working for me. > But I will look into this to find out any missing pieces. > > SOCFPGA_CYCLONE5 # setenv ethaddr 02:11:22:33:44:55 > SOCFPGA_CYCLONE5 # dhcp > Speed: 1000, full duplex > BOOTP broadcast 1 > BOOTP broadcast 2 > BOOTP broadcast 3 > BOOTP broadcast 4 > BOOTP broadcast 5 > BOOTP broadcast 6 > BOOTP broadcast 7 > BOOTP broadcast 8 > BOOTP broadcast 9 > BOOTP broadcast 10 > BOOTP broadcast 11 > BOOTP broadcast 12 > BOOTP broadcast 13 > BOOTP broadcast 14 > BOOTP broadcast 15 > BOOTP broadcast 16 > BOOTP broadcast 17 > > Retry time exceeded; starting again This is on the SoCDK, right ? > 3. MMC is not enabled in SocFPGA. > I recall there is a patch from Pavel. > I believe its pending for v2 due to some comments. This should be in the tree in fact. Is CONFIG_CMD_MMC defined ? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
