Dear Simon Glass, On 23/07/14 21:11, Simon Glass wrote: > Most of the arndale features are common with other exynos5250 boards. To > permit easier addition of driver model support, use the common file. > > Signed-off-by: Simon Glass <s...@chromium.org> > --- > > include/configs/arndale.h | 212 > +++------------------------------------------- > 1 file changed, 14 insertions(+), 198 deletions(-) > > diff --git a/include/configs/arndale.h b/include/configs/arndale.h > index 370db82..1f0bec9 100644 > --- a/include/configs/arndale.h > +++ b/include/configs/arndale.h > @@ -9,219 +9,55 @@ > #ifndef __CONFIG_ARNDALE_H > #define __CONFIG_ARNDALE_H > > -/* High Level Configuration Options */ > -#define CONFIG_SAMSUNG /* in a SAMSUNG core */ > -#define CONFIG_S5P /* S5P Family */ > -#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family > */ > -#define CONFIG_EXYNOS5250 > - > -#include <asm/arch/cpu.h> /* get chip and board defs */ > - > -#define CONFIG_SYS_GENERIC_BOARD > -#define CONFIG_ARCH_CPU_INIT > -#define CONFIG_DISPLAY_CPUINFO > -#define CONFIG_DISPLAY_BOARDINFO > - > -#define CONFIG_OF_CONTROL > -#define CONFIG_OF_SEPARATE > - > -/* Allow tracing to be enabled */ > -#define CONFIG_TRACE > -#define CONFIG_CMD_TRACE > -#define CONFIG_TRACE_BUFFER_SIZE (16 << 20) > -#define CONFIG_TRACE_EARLY_SIZE (8 << 20) > -#define CONFIG_TRACE_EARLY > -#define CONFIG_TRACE_EARLY_ADDR 0x50000000 > - > -/* Keep L2 Cache Disabled */ > -#define CONFIG_SYS_DCACHE_OFF > - > -#define CONFIG_SYS_SDRAM_BASE 0x40000000 > -#define CONFIG_SYS_TEXT_BASE 0x43E00000 > - > -/* input clock of PLL: SMDK5250 has 24MHz input clock */ > -#define CONFIG_SYS_CLK_FREQ 24000000 > - > -#define CONFIG_SETUP_MEMORY_TAGS > -#define CONFIG_CMDLINE_TAG > -#define CONFIG_INITRD_TAG > -#define CONFIG_CMDLINE_EDITING > - > -/* Power Down Modes */ > -#define S5P_CHECK_SLEEP 0x00000BAD > -#define S5P_CHECK_DIDLE 0xBAD00000 > -#define S5P_CHECK_LPA 0xABAD0000 > - > -/* Offset for inform registers */ > -#define INFORM0_OFFSET 0x800 > -#define INFORM1_OFFSET 0x804 > - > -/* Size of malloc() pool */ > -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) > - > -/* select serial console configuration */ > -#define CONFIG_BAUDRATE 115200 > -#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 > -#define CONFIG_SILENT_CONSOLE > - > -/* Console configuration */ > -#define CONFIG_CONSOLE_MUX > -#define CONFIG_SYS_CONSOLE_IS_IN_ENV > -#define EXYNOS_DEVICE_SETTINGS \ > - "stdin=serial\0" \ > - "stdout=serial\0" \ > - "stderr=serial\0" > - > -#define CONFIG_EXTRA_ENV_SETTINGS \ > - EXYNOS_DEVICE_SETTINGS > +#include "exynos5250-common.h" > + > +#undef CONFIG_BOARD_COMMON > +#undef CONFIG_ARCH_EARLY_INIT_R > > /* SD/MMC configuration */ > -#define CONFIG_GENERIC_MMC > -#define CONFIG_MMC > -#define CONFIG_SDHCI > -#define CONFIG_S5P_SDHCI > -#define CONFIG_DWMMC > -#define CONFIG_EXYNOS_DWMMC > #define CONFIG_SUPPORT_EMMC_BOOT > -#define CONFIG_BOUNCE_BUFFER > - > - > -#define CONFIG_BOARD_EARLY_INIT_F > -#define CONFIG_SKIP_LOWLEVEL_INIT > - > -/* PWM */ > -#define CONFIG_PWM > > /* allow to overwrite serial and ethaddr */ > #define CONFIG_ENV_OVERWRITE > > -/* Command definition*/ > -#include <config_cmd_default.h> > - > -#define CONFIG_CMD_PING > -#define CONFIG_CMD_ELF > -#define CONFIG_CMD_MMC > #define CONFIG_CMD_EXT2 > -#define CONFIG_CMD_FAT > -#define CONFIG_CMD_NET > -#define CONFIG_CMD_HASH > - > -#define CONFIG_BOOTDELAY 3 > -#define CONFIG_ZERO_BOOTDELAY_CHECK > > /* USB */ > -#define CONFIG_CMD_USB > +#undef CONFIG_USB_XHCI > +#undef CONFIG_USB_XHCI_EXYNOS > #define CONFIG_USB_EHCI > #define CONFIG_USB_EHCI_EXYNOS > -#define CONFIG_USB_STORAGE > > +#undef CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS > #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 > #define CONFIG_USB_HOST_ETHER > #define CONFIG_USB_ETHER_ASIX > > /* MMC SPL */ > #define CONFIG_EXYNOS_SPL > -#define CONFIG_SPL > -#define COPY_BL2_FNPTR_ADDR 0x02020030 > - > -#define CONFIG_SPL_LIBCOMMON_SUPPORT > - > -/* specific .lds file */ > -#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" > -#define CONFIG_SPL_TEXT_BASE 0x02023400 > -#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) > - > -#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" > > /* Miscellaneous configurable options */ > -#define CONFIG_SYS_LONGHELP /* undef to save memory */ > -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser > */ > +#undef CONFIG_SYS_PROMPT > #define CONFIG_SYS_PROMPT "ARNDALE # " > -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ > -#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ > -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ > +#undef CONFIG_DEFAULT_CONSOLE > #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" > -/* Boot Argument Buffer Size */ > -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE > -/* memtest works on */ > -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE > -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + > 0x5E00000) > -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) > - > -#define CONFIG_RD_LVL > > #define CONFIG_NR_DRAM_BANKS 8 > #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ > -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE > -#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE > -#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) > -#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE > -#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) > -#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE > -#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) > -#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE > -#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) > -#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE > -#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) > -#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE > -#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) > -#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE > -#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) > -#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE > - > -#define CONFIG_SYS_MONITOR_BASE 0x00000000 > - > -/* FLASH and environment organization */ > -#define CONFIG_SYS_NO_FLASH > -#undef CONFIG_CMD_IMLS > -#define CONFIG_IDENT_STRING " for ARNDALE" > > -#define CONFIG_SYS_MMC_ENV_DEV 0 > +#undef CONFIG_IDENT_STRING > +#define CONFIG_IDENT_STRING " for ARNDALE" > > +#undef CONFIG_ENV_IS_IN_SPI_FLASH > #define CONFIG_ENV_IS_IN_MMC > -#define CONFIG_SECURE_BL1_ONLY > - > -/* Secure FW size configuration */ > -#ifdef CONFIG_SECURE_BL1_ONLY > -#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ > -#else > -#define CONFIG_SEC_FW_SIZE 0 > -#endif > - > -/* Configuration of BL1, BL2, ENV Blocks on mmc */ > -#define CONFIG_RES_BLOCK_SIZE (512) > -#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ > -#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ > -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ > - > -#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) > -#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) > -#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) > - > -/* U-boot copy size from boot Media to DRAM.*/ > -#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) > -#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) > - > -#define CONFIG_DOS_PARTITION > -#define CONFIG_EFI_PARTITION > -#define CONFIG_CMD_PART > -#define CONFIG_PARTITION_UUIDS > > +#undef CONFIG_ENV_OFFSET > +#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) > > #define CONFIG_IRAM_STACK 0x02050000 > > #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK > > -/* I2C */ > -#define CONFIG_SYS_I2C_INIT_BOARD > -#define CONFIG_SYS_I2C > -#define CONFIG_CMD_I2C > -#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ > -#define CONFIG_SYS_I2C_S3C24X0 > -#define CONFIG_MAX_I2C_NUM 8 > -#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 > -#define CONFIG_I2C_EDID > - > /* PMIC */ > #define CONFIG_PMIC > #define CONFIG_POWER_I2C > @@ -231,24 +67,4 @@ > > #define CONFIG_PREBOOT > > -/* Ethernet Controllor Driver */ > -#ifdef CONFIG_CMD_NET > -#define CONFIG_SMC911X > -#define CONFIG_SMC911X_BASE 0x5000000 > -#define CONFIG_SMC911X_16_BIT > -#define CONFIG_ENV_SROM_BANK 1 > -#endif /*CONFIG_CMD_NET*/ > - > -/* Enable PXE Support */ > -#ifdef CONFIG_CMD_NET > -#define CONFIG_CMD_PXE > -#define CONFIG_MENU > -#endif > - > -/* Enable devicetree support */ > -#define CONFIG_OF_LIBFDT > - > -/* Enable Time Command */ > -#define CONFIG_CMD_TIME > - > #endif /* __CONFIG_H */ >
Features those are you did undef at this file are not common features. I think we should need to rearrange features. Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot