Thanks It's the FS25.00. Is this correct?
Thanks Mark TC Liew wrote: > Mark, > > There could be a hardware issue. Is the phy crystal on the board is > F25.00 or F25.00P? > > Regards, > TsiChung > > On Mon, May 25, 2009 at 3:15 PM, Mark Giacobbe > <mgiaco...@adaptivedesignconcepts.com> wrote: > >> Hi All - >> >> I'm new to u-boot and I am running into some issues. I an using the >> Axiom 5282lite board and I cannot get the ethernet working. >> >> I have u-boot flashed onto the board, and when I connect the board >> to my Linksys WRT54G router, the Link LED on the board constantly >> flashes, as does the LED for that port on the router. >> >> I assigned an IP to the board, outside the DHCP range, but I cannot >> ping the board, and the board cannot ping anything, including the router. >> >> Any ideas? >> >> Speaking of DHCP, does the code support DHCP for the 5282? >> >> Any help you be appreciated. >> Thanks >> Mark >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot >> >> > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
