Mark, There could be a hardware issue. Is the phy crystal on the board is F25.00 or F25.00P?
Regards, TsiChung On Mon, May 25, 2009 at 3:15 PM, Mark Giacobbe <mgiaco...@adaptivedesignconcepts.com> wrote: > Hi All - > > I'm new to u-boot and I am running into some issues. I an using the > Axiom 5282lite board and I cannot get the ethernet working. > > I have u-boot flashed onto the board, and when I connect the board > to my Linksys WRT54G router, the Link LED on the board constantly > flashes, as does the LED for that port on the router. > > I assigned an IP to the board, outside the DHCP range, but I cannot > ping the board, and the board cannot ping anything, including the router. > > Any ideas? > > Speaking of DHCP, does the code support DHCP for the 5282? > > Any help you be appreciated. > Thanks > Mark > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
