Ping!
On Wed, Aug 20, 2014 at 10:14 PM, Peter Crosthwaite
<crosthwaitepe...@gmail.com> wrote:
> To better enable debug of u-boot itself (in particular SPL). To debug
> u-boot you want to put your board in JTAG boot mode for quick recompile
> and elf downloads via the JTAG debugger. Yet you may still want to boot
> from a persistent storage media (SD or QSPI). Allow override of the
> boot mode pins to facilitate this.
>
> Signed-off-by: Peter Crosthwaite <crosthwaite.pe...@gmail.com>
> ---
> arch/arm/cpu/armv7/zynq/slcr.c | 4 ++++
> doc/README.zynq | 6 ++++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
> index 934ccc3..26e02b8 100644
> --- a/arch/arm/cpu/armv7/zynq/slcr.c
> +++ b/arch/arm/cpu/armv7/zynq/slcr.c
> @@ -155,8 +155,12 @@ void zynq_slcr_devcfg_enable(void)
>
> u32 zynq_slcr_get_boot_mode(void)
> {
> +#ifdef CONFIG_ZYNQ_BM_FORCE
> + return CONFIG_ZYNQ_BM_FORCE;
> +#else
> /* Get the bootmode register value */
> return readl(&slcr_base->boot_mode);
> +#endif
> }
>
> u32 zynq_slcr_get_idcode(void)
> diff --git a/doc/README.zynq b/doc/README.zynq
> index 043c970..70be7ae 100644
> --- a/doc/README.zynq
> +++ b/doc/README.zynq
> @@ -52,6 +52,12 @@ board_late_init() will read the bootmode values using slcr
> bootmode register
> at runtime and assign the modeboot variable to specific bootmode string which
> is intern used in autoboot.
>
> +This value can be overridden at compile time with the define
> +CONFIG_ZYNQ_BM_FORCE. This is useful for debugging a u-boot elf downloaded
> +over JTAG. E.g. The board will be jumpered for ZYNQ_BM_JTAG, but you can
> +force u-boot to attempt an SD or QSPI boot should that be what you want to
> +debug.
> +
> SLCR bootmode register Bit[3:0] values
> #define ZYNQ_BM_NOR 0x02
> #define ZYNQ_BM_SD 0x05
> --
> 1.9.1
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
