On 14-08-26 02:14 AM, Lukasz Majewski wrote:
Hi Steve,



On 14-08-25 07:57 AM, Lukasz Majewski wrote:
Hi Steve,

This series implements the "fastboot flash" command for eMMC
devices. It supports both raw and sparse images.

NOTES:
- the support for the "fastboot flash" command is enabled with
CONFIG_FASTBOOT_FLASH
- the support for eMMC is enabled with
CONFIG_FASTBOOT_FLASH_MMC_DEV
- (future) the support for NAND would be enabled with
CONFIG_FASTBOOT_FLASH_NAND(???)

This has been tested on ARMv7.

----

This series depends on:
    http://patchwork.ozlabs.org/patch/379438/

This patch is already applied.
Correct
(But it wasn't when I was preparing this....)


    http://patchwork.ozlabs.org/patch/382443/ (to 382446)

Could you resend the above patch series one more time?

  From the links it seems that in PATCH 1/4 you add
the ./common/aboot.c file and at PATCH 2/4 you remove it.

Is this done on purpose?
yes: done on purpose (in order to see the history of the changes to
the file....) -- see the comments in the cover letter to that
patch-series!!!

Ok, Now it is clear.

Is fair as I know bsd-3L-clause license is compatible with GPL.

However, to be 100% sure I'd like to ask Tom (as he has much more
legal experience than me) to confirm that this code can be added to
u-boot.

OK -- note that this "bsd-3L-clause" clause is almost identical to the existing "bsd-3-clause"....
Thanks, Steve


(I've also trimmed down the CC list).


Changes in v5:
- use the common/aboot.c for the "sparse format" handling

Changes in v4:
- rearranged this patchset so that "sparse_format.h" can be dropped
(if we cannot resolve the copyright/licensing issues)
- update mmc_get_dev(...) to get_dev("mmc",....)
- update printf() to puts() where applicable
- update debug string as per feedback
- rearranged "sparse format" support in this patchset, in order to
isolate...

Changes in v3:
- remove most references to 'mmc',
    which leaves only one mmc specific function: mmc_get_dev()

Changes in v2:
- split large function into three
- improved handling of response messages
- additional partition size checking when writing sparse image
- update README.android-fastboot file
- new in v2

Steve Rae (4):
    usb/gadget: fastboot: add eMMC support for flash command
    usb/gadget: fastboot: add support for flash command
    usb/gadget: fastboot: minor cleanup
    usb/gadget: fastboot: implement sparse format

   README                          | 10 +++++
   common/Makefile                 |  6 +++
   common/cmd_fastboot.c           |  7 +--
   common/fb_mmc.c                 | 95
+++++++++++++++++++++++++++++++++++++++++
doc/README.android-fastboot     |  5 ++-
drivers/usb/gadget/f_fastboot.c | 44 +++++++++++++++++--
include/fb_mmc.h                |  8 ++++ 7 files changed, 166
insertions(+), 9 deletions(-) create mode 100644 common/fb_mmc.c
   create mode 100644 include/fb_mmc.h




Thanks, Steve



_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to