This series implements the "fastboot flash" command for eMMC devices. It supports both raw and sparse images.
NOTES: - the support for the "fastboot flash" command is enabled with CONFIG_FASTBOOT_FLASH - the support for eMMC is enabled with CONFIG_FASTBOOT_FLASH_MMC_DEV - (future) the support for NAND would be enabled with CONFIG_FASTBOOT_FLASH_NAND(???) This has been tested on ARMv7. ---- This series depends on: http://patchwork.ozlabs.org/patch/379438/ http://patchwork.ozlabs.org/patch/382443/ (to 382446) Changes in v5: - use the common/aboot.c for the "sparse format" handling Changes in v4: - rearranged this patchset so that "sparse_format.h" can be dropped (if we cannot resolve the copyright/licensing issues) - update mmc_get_dev(...) to get_dev("mmc",....) - update printf() to puts() where applicable - update debug string as per feedback - rearranged "sparse format" support in this patchset, in order to isolate... Changes in v3: - remove most references to 'mmc', which leaves only one mmc specific function: mmc_get_dev() Changes in v2: - split large function into three - improved handling of response messages - additional partition size checking when writing sparse image - update README.android-fastboot file - new in v2 Steve Rae (4): usb/gadget: fastboot: add eMMC support for flash command usb/gadget: fastboot: add support for flash command usb/gadget: fastboot: minor cleanup usb/gadget: fastboot: implement sparse format README | 10 +++++ common/Makefile | 6 +++ common/cmd_fastboot.c | 7 +-- common/fb_mmc.c | 95 +++++++++++++++++++++++++++++++++++++++++ doc/README.android-fastboot | 5 ++- drivers/usb/gadget/f_fastboot.c | 44 +++++++++++++++++-- include/fb_mmc.h | 8 ++++ 7 files changed, 166 insertions(+), 9 deletions(-) create mode 100644 common/fb_mmc.c create mode 100644 include/fb_mmc.h -- 1.8.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
