Use Compulab eeprom module to obtain revision number, serial number, and
mac address from the EEPROM.

Cc: Igor Grinberg <grinb...@compulab.co.il>
Cc: Stefano Babic <sba...@denx.de>
Cc: Tom Rini <tr...@ti.com>
Signed-off-by: Nikita Kiryanov <nik...@compulab.co.il>
---
Changes in V4:
        - Introduce get_board_rev() here.

Changes in V3:
        - No changes

Changes in V2:
        - No changes

 board/compulab/cm_fx6/cm_fx6.c | 30 ++++++++++++++++++++++++++++++
 include/configs/cm_fx6.h       |  2 ++
 2 files changed, 32 insertions(+)

diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index d21c561..1664fe8 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -20,6 +20,7 @@
 #include <asm/io.h>
 #include <asm/gpio.h>
 #include "common.h"
+#include "../common/eeprom.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -209,8 +210,31 @@ static iomux_v3_cfg_t const enet_pads[] = {
                                                MUX_PAD_CTRL(ENET_PAD_CTRL)),
 };
 
+static int handle_mac_address(void)
+{
+       unsigned char enetaddr[6];
+       int rc;
+
+       rc = eth_getenv_enetaddr("ethaddr", enetaddr);
+       if (rc)
+               return 0;
+
+       rc = cl_eeprom_read_mac_addr(enetaddr);
+       if (rc)
+               return rc;
+
+       if (!is_valid_ether_addr(enetaddr))
+               return -1;
+
+       return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
 int board_eth_init(bd_t *bis)
 {
+       int res = handle_mac_address();
+       if (res)
+               puts("No MAC address found\n");
+
        SETUP_IOMUX_PADS(enet_pads);
        /* phy reset */
        gpio_direction_output(CM_FX6_ENET_NRST, 0);
@@ -364,3 +388,9 @@ int dram_init(void)
 
        return 0;
 }
+
+u32 get_board_rev(void)
+{
+       return cl_eeprom_get_board_rev();
+}
+
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index e70259e..cccc989 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -232,6 +232,8 @@
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SERIAL_TAG
 
 /* misc */
 #define CONFIG_SYS_GENERIC_BOARD
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to