On 20/08/14 15:08, Nikita Kiryanov wrote:
According to MX6 TRM, both MMDC and DRAM should be configured to
the same powerdown precharge. Currently, mx6_dram_cfg()
configures MMDC for fast pd (MDPDC[7] = 0), and the DRAM for
'slow exit (DLL off)' (MR0[12] = 0).

Configure MMDC for slow pd.


We have confirmation from a Freescale representative that the
configurations should be aligned:

https://community.freescale.com/thread/328577

--
Regards,
Nikita Kiryanov
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to