On 07/23/2014 11:56 PM, Benoit Sansoni wrote: > York, > > I am going to check out the method that you talk about. > For now the fix allow me to boot our board with 8GB it is a good step > for me. > > Thanks > Benoit > > On 07/23/2014 06:32 PM, York Sun wrote: >> Benoit, >> >> If your interest is in initializing DDR for ECC, you don't have use >> dma_meminit(). There is a better and faster way to do so. All Freescale >> modern >> DDR controllers support this feature. All you have to do is to define these >> macros >> >> CONFIG_DDR_ECC >> CONFIG_ECC_INIT_VIA_DDRCONTROLLER >> CONFIG_MEM_INIT_VALUE >> >> There are plenty of example for you to follow. >> >> But again, we should fix the DMA function anyway. >>
Benoit, Have you tried my suggestion? York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot