On Wednesday 20 May 2009 15:40:00 Prafulla Wadaskar wrote: > > I would like to give your Kirkwood support a try and start > > compiling the latest version before trying to port a custom > > board. Now I'm failing to compile the latest version posted > > on the list. Most likely I missed some patches or applied > > them to the wrong git repository. > > Thanks Stefan, your efforts will help me a lot
Sure. I'll try to help out if possible. But I'm only starting into this project right now. So please don't expect any "real output" soon. But I definitely can give some feedback... > > I tried it on u-boot/next and on u-boot-arm/next. Both > > I have used u-boot-arm/next pls use the same. OK, understood. > > failed. I applied those > > patches: > > > > [PATCH v8] Marvell Kirkwood family SOC support [PATCH v9] > > Marvell MV88F6281GTW_GE Board support [PATCH v3] Gbe > > Controller driver support for kirkwood SOCs > > > > It would be great if you could tell me what I am missing here > > (additional patches or wrong repository?). > > You will need additional two patches as mentioned below > http://git.denx.de/?p=u-boot/u-boot-blackfin.git;a=commit;h=12cedeb9589ef12 >03e3308e80b11e5ee73261ced > http://lists.denx.de/pipermail/u-boot/2009-May/052905.html > > Apart from this pls add below line to drivers/net/kirkwood_egiga.c remove > below mentioned errors #include <asm/arch/kirkwood.h> > > I hope build will be through... Best of Luck Yes, this works. Thanks a lot. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
