> -----Original Message----- > From: Stefan Roese [mailto:s...@denx.de] > Sent: Wednesday, May 20, 2009 5:40 PM > To: u-boot@lists.denx.de > Cc: Prafulla Wadaskar; Ashish Karkare; Prabhanjan Sarnaik; > Ronen Shitrit > Subject: Re: [U-Boot] [PATCH v8] Marvell Kirkwood family SOC support > > Hi Prafulla, > > On Tuesday 19 May 2009 22:07:58 Prafulla Wadaskar wrote: > > Kirkwood family controllers are highly integrated SOCs based on > > Feroceon-88FR131/Sheeva-88SV131 cpu core. > > I would like to give your Kirkwood support a try and start > compiling the latest version before trying to port a custom > board. Now I'm failing to compile the latest version posted > on the list. Most likely I missed some patches or applied > them to the wrong git repository.
Thanks Stefan, your efforts will help me a lot > > I tried it on u-boot/next and on u-boot-arm/next. Both I have used u-boot-arm/next pls use the same. > failed. I applied those > patches: > > [PATCH v8] Marvell Kirkwood family SOC support [PATCH v9] > Marvell MV88F6281GTW_GE Board support [PATCH v3] Gbe > Controller driver support for kirkwood SOCs > > It would be great if you could tell me what I am missing here > (additional patches or wrong repository?). You will need additional two patches as mentioned below http://git.denx.de/?p=u-boot/u-boot-blackfin.git;a=commit;h=12cedeb9589ef1203e3308e80b11e5ee73261ced http://lists.denx.de/pipermail/u-boot/2009-May/052905.html Apart from this pls add below line to drivers/net/kirkwood_egiga.c remove below mentioned errors #include <asm/arch/kirkwood.h> I hope build will be through... Best of Luck Regards.. Prafulla . . > > Here the error messages from building with those 3 patches on > top of u-boot- > arm/next: > > [ste...@stefan-desktop u-boot-arm (kirkwood)]$ ./MAKEALL > mv88f6281gtw_ge Configuring for mv88f6281gtw_ge board... > mpp.c: In function 'kirkwood_mpp_conf': > mpp.c:53: warning: unused variable 'gpio_mode' > kirkwood_egiga.c: In function 'smi_reg_read': > kirkwood_egiga.c:66: warning: implicit declaration of function 'readl' > kirkwood_egiga.c:98: warning: implicit declaration of > function 'writel' > kirkwood_egiga.c: In function 'set_dram_access': > kirkwood_egiga.c:451: warning: implicit declaration of > function 'kw_sdram_bar' > kirkwood_egiga.c:452: warning: implicit declaration of > function 'kw_sdram_bs' > kirkwood_egiga.c: In function 'kirkwood_egiga_initialize': > kirkwood_egiga.c:1593: error: 'KW_EGIGA0_BASE' undeclared > (first use in this > function) > kirkwood_egiga.c:1593: error: (Each undeclared identifier is > reported only once > kirkwood_egiga.c:1593: error: for each function it appears in.) > kirkwood_egiga.c:1597: error: 'KW_EGIGA1_BASE' undeclared > (first use in this > function) > kirkwood_egiga.c:1610: warning: implicit declaration of > function 'get_random_hex' > > > Thanks. > > Best regards, > Stefan > > ===================================================================== > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: > off...@denx.de > ===================================================================== > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
