On Mon, Jun 23, 2014 at 04:25:38PM -0500, Felipe Balbi wrote: > some boards won't work if the PHY isn't explicitly > powered up. > > Signed-off-by: Felipe Balbi <ba...@ti.com>
ping, this is still pending in mainline u-boot. Without this, usb won't
work on am437x-sk.
> ---
> drivers/usb/host/xhci-omap.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c
> index e667810..912b2bd 100644
> --- a/drivers/usb/host/xhci-omap.c
> +++ b/drivers/usb/host/xhci-omap.c
> @@ -98,6 +98,7 @@ static int omap_xhci_core_init(struct omap_xhci *omap)
> {
> int ret = 0;
>
> + usb_phy_power(1);
> omap_enable_phy(omap);
>
> ret = dwc3_core_init(omap->dwc3_reg);
> --
> 2.0.0.390.gcb682f8
>
--
balbi
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
