On 06/27/2014 10:36 AM, Felipe Balbi wrote: > On Fri, Jun 27, 2014 at 10:27:30AM -0500, Dan Murphy wrote: >> Hi >> >> On 06/23/2014 04:25 PM, Felipe Balbi wrote: >>> some boards won't work if the PHY isn't explicitly >>> powered up. >>> >>> Signed-off-by: Felipe Balbi <ba...@ti.com> >>> --- >>> drivers/usb/host/xhci-omap.c | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c >>> index e667810..912b2bd 100644 >>> --- a/drivers/usb/host/xhci-omap.c >>> +++ b/drivers/usb/host/xhci-omap.c >>> @@ -98,6 +98,7 @@ static int omap_xhci_core_init(struct omap_xhci *omap) >>> { >>> int ret = 0; >>> >>> + usb_phy_power(1); >> Should this not be in the omap_usb_phy.c in the omap_enable_phy call below? >> I mean you are enabling the PHY right? > no, I'm powering it up :-) moreover omap_xhci_core_exit() calls > usb_power_power(0), so it's only balancing the calls. >
OK that makes sense then -- ------------------ Dan Murphy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot