This patch introduces code clean-up for exynos boot mode check.
It includes:
- removal of typedef: boot_mode
- move the boot mode enum to arch-exynos/power.h
- add new function: get_boot_mode() for OM[5:1] pin check
- update spl boot code
Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
---
arch/arm/cpu/armv7/exynos/power.c | 7 +++++++
arch/arm/cpu/armv7/exynos/spl_boot.c | 5 ++---
arch/arm/include/asm/arch-exynos/power.h | 20 ++++++++++++++++++++
arch/arm/include/asm/arch-exynos/spl.h | 17 ++---------------
4 files changed, 31 insertions(+), 18 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/power.c
b/arch/arm/cpu/armv7/exynos/power.c
index 638ee0b..e1ab3d6 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -202,3 +202,10 @@ void power_exit_wakeup(void)
else
exynos4_power_exit_wakeup();
}
+
+unsigned int get_boot_mode(void)
+{
+ unsigned int om_pin = samsung_get_base_power();
+
+ return readl(om_pin) & OM_PIN_MASK;
+}
diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c
b/arch/arm/cpu/armv7/exynos/spl_boot.c
index ade45fd..c9b0884 100644
--- a/arch/arm/cpu/armv7/exynos/spl_boot.c
+++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
@@ -20,7 +20,6 @@
#include "clock_init.h"
DECLARE_GLOBAL_DATA_PTR;
-#define OM_STAT (0x1f << 1)
/* Index into irom ptr table */
enum index {
@@ -184,7 +183,7 @@ static void exynos_spi_copy(unsigned int uboot_size,
unsigned int uboot_addr)
*/
void copy_uboot_to_ram(void)
{
- enum boot_mode bootmode = BOOT_MODE_OM;
+ u32 bootmode = BOOT_MODE_OM;
u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
u32 offset = 0, size = 0;
@@ -207,7 +206,7 @@ void copy_uboot_to_ram(void)
#endif
if (bootmode == BOOT_MODE_OM)
- bootmode = readl(samsung_get_base_power()) & OM_STAT;
+ bootmode = get_boot_mode();
switch (bootmode) {
#ifdef CONFIG_SPI_BOOTING
diff --git a/arch/arm/include/asm/arch-exynos/power.h
b/arch/arm/include/asm/arch-exynos/power.h
index 4f2447b..d08f58b 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -1670,6 +1670,26 @@ struct exynos5420_power {
};
#endif /* __ASSEMBLY__ */
+#define OM_PIN_BITS 0x1f
+#define OM_PIN_SHIFT 0x1
+#define OM_PIN_MASK (OM_PIN_BITS << OM_PIN_SHIFT)
+
+enum {
+ /*
+ * Assign the OM pin values for respective boot modes.
+ * Exynos4 does not support spi boot and the mmc boot OM
+ * pin values are the same across Exynos4 and Exynos5.
+ */
+ BOOT_MODE_MMC = 4,
+ BOOT_MODE_EMMC = 8, /* EMMC4.4 */
+ BOOT_MODE_SERIAL = 20,
+ /* Boot based on Operating Mode pin settings */
+ BOOT_MODE_OM = 32,
+ BOOT_MODE_USB, /* Boot using USB download */
+};
+
+unsigned int get_boot_mode(void);
+
void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable);
#define EXYNOS_MIPI_PHY_ENABLE (1 << 0)
diff --git a/arch/arm/include/asm/arch-exynos/spl.h
b/arch/arm/include/asm/arch-exynos/spl.h
index b1d68c3..cdcb2bc 100644
--- a/arch/arm/include/asm/arch-exynos/spl.h
+++ b/arch/arm/include/asm/arch-exynos/spl.h
@@ -8,20 +8,7 @@
#define __ASM_ARCH_EXYNOS_SPL_H__
#include <asm/arch-exynos/dmc.h>
-
-enum boot_mode {
- /*
- * Assign the OM pin values for respective boot modes.
- * Exynos4 does not support spi boot and the mmc boot OM
- * pin values are the same across Exynos4 and Exynos5.
- */
- BOOT_MODE_MMC = 4,
- BOOT_MODE_EMMC = 8, /* EMMC4.4 */
- BOOT_MODE_SERIAL = 20,
- /* Boot based on Operating Mode pin settings */
- BOOT_MODE_OM = 32,
- BOOT_MODE_USB, /* Boot using USB download */
-};
+#include <asm/arch/power.h>
#ifndef __ASSEMBLY__
/* Parameters of early board initialization in SPL */
@@ -62,7 +49,7 @@ struct spl_machine_param {
* table only for mmc boot.
*/
u32 uboot_size;
- enum boot_mode boot_source; /* Boot device */
+ unsigned boot_source; /* Boot device */
unsigned frequency_mhz; /* Frequency of memory in MHz */
unsigned arm_freq_mhz; /* ARM Frequency in MHz */
u32 serial_base; /* Serial base address */
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
