Dear Przemyslaw Marczak,
On 26/06/14 23:15, Przemyslaw Marczak wrote:
> It is possible to boot from a few media devices, especially
> using a micro SD or eMMC slots. In this situation depends on
> a boot device - some setup can be changeg.
>
> This change adds function:
> boot_device() - which returns an OM[1:5] bits value
>
> This allows checking if boot device is SD(0x2).
>
> Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
>
> ---
> Changes v3:
> - new commit after separate one into two
> ---
> board/samsung/common/board.c | 10 +++++++++-
> include/samsung/misc.h | 7 +++++++
> 2 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
> index 9dc7c83..ecf3f76 100644
> --- a/board/samsung/common/board.c
> +++ b/board/samsung/common/board.c
> @@ -41,6 +41,13 @@ int __exynos_power_init(void)
> int exynos_power_init(void)
> __attribute__((weak, alias("__exynos_power_init")));
>
> +unsigned int boot_device(void)
> +{
> + unsigned int om_stat = samsung_get_base_power();
> +
> + return BOOT_DEVICE(readl(om_stat));
> +}
> +
> #if defined CONFIG_EXYNOS_TMU
> /* Boot Time Thermal Analysis for SoC temperature threshold breach */
> static void boot_temp_check(void)
> @@ -243,19 +250,20 @@ int board_eth_init(bd_t *bis)
> int board_mmc_init(bd_t *bis)
> {
> int ret;
> +
> #ifdef CONFIG_DWMMC
> /* dwmmc initializattion for available channels */
> ret = exynos_dwmmc_init(gd->fdt_blob);
> if (ret)
> debug("dwmmc init failed\n");
> #endif
> -
> #ifdef CONFIG_SDHCI
> /* mmc initializattion for available channels */
> ret = exynos_mmc_init(gd->fdt_blob);
> if (ret)
> debug("mmc init failed\n");
> #endif
> +
> return ret;
> }
> #endif
> diff --git a/include/samsung/misc.h b/include/samsung/misc.h
> index 10653a1..57bac7d 100644
> --- a/include/samsung/misc.h
> +++ b/include/samsung/misc.h
> @@ -28,4 +28,11 @@ void check_boot_mode(void);
> void draw_logo(void);
> #endif
>
> +#define BOOT_DEVICE_SDMMC 0x2
> +#define BOOT_DEVICE_MASK 0x1f
> +#define BOOT_DEVICE_SHIFT 0x1
> +#define BOOT_DEVICE(x) (((x) >> BOOT_DEVICE_SHIFT) &
> BOOT_DEVICE_MASK)
> +
> +unsigned int boot_device(void);
Hm, do we need to make this function to non-static?
If so, it should be placed in power.c - get_om_stat()?
Thanks,
Minkyu Kang.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
