On Friday, June 06, 2014 at 12:18:09 AM, Marek Vasut wrote: > On Wednesday, May 21, 2014 at 04:01:55 AM, Peter Schumann wrote: > > This patch makes it possible to boot from battery on olinuxino Boards > > from Olimex. > > > > We should not set DOUBLE_FETS in HW_POWER_MINPWR, it makes my system > > reset with in seconds while running on battery power. > > > > Also mxs_power_enable_4p2() should not be called if running from > > battery. It switches VDDD and VDDA to LinReg mode and than turns off > > the VDDIO DCDC supply. At this point the system resets. > > If we run on battery this is no good idea because the LinRegs are > > chained behind VDDIO and battery voltage seems not enough to power > > the system from LinRegs. > > Also is the power system already running on DCDC after BootROM hands > > over to u-boot, so no sense in switching back to LinRegs. > > Sorry for the late reply, I'm somewhat congested recently. In the meantime, > I was not able to test this yet. But you're missing Signed-off-by: line, > can you please re-send this with a proper SoB line [1] ? > > [1] http://www.denx.de/wiki/U-Boot/Patches#General_Patch_Submission_Rules
Bump? Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
