Wolfgang Denk wrote:
Dear prathika,
please do not top post / full quote. Make sure to read and understand
http://www.netmeister.org/news/learn2quote.html
In message <4a08080e.6030...@deeopl.com> you wrote:
You have mentioned to add the test code to the existing POST framework. In my
hardware, I have CAN controller interfaced to SPI interface, SPI DACs, parallel
ADCs, 1553B controller interfaced to EBC.
I have a CPLD to generate chip selects to these ICs.
If this test code will be useful, please let me to know how to add it to the
POST framework.
Well, study the existing code and the documentation, than add your
test code.
I understood that "tftp" command in u-boot has been coded only for receiving data from
the PC and not to transmit, to PC.If this is the case should i add the transmit code to the
"tftp" command?
Yes.
Even if I use this command for data transfer, what are the requirements for the
application in PC side?
I don't understand this question?
--Here, I will be connecting my board through a GUI to a Windows
PC. I will interact using this GUI. Actually if I use "tftp"
command for file transfer, do I need some tftp client or server
running on my Windows PC?
Thanks & Regards,
Prathika R
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
