hi,
You have mentioned to add the test code to the existing POST framework. In my
hardware, I have CAN controller interfaced to SPI interface, SPI DACs, parallel
ADCs, 1553B controller interfaced to EBC.
I have a CPLD to generate chip selects to these ICs.
If this test code will be useful, please let me to know how to add it to the
POST framework.
I just gave an example of text file, it can be binary file transfer also
between my board and PC.
I understood that "tftp" command in u-boot has been coded only for receiving data from
the PC and not to transmit, to PC.If this is the case should i add the transmit code to the
"tftp" command?
Even if I use this command for data transfer, what are the requirements for the
application in PC side?
Thanks & Regards,
Prathika R
Dear prathika,
In message <4A07FAF7.30905 at deeopl.com
<http://lists.denx.de/mailman/listinfo/u-boot>> you wrote:
/
/>/ I am porting u-boot on PPC440 EP. I am porting a stand alone application
/>/ on it.
/>/ I have coded for testing the peripherals of PPC. I have no issues in
/>/ executing this application.
/
You should have coded the test code in the contexzt of the existing
POST framework instead of a separate standalone application. that
would have been more useful, at least to others.
/ Similarly I want to test ethernet communication also. I would like to
/>/ transmit a text file from my board to PC and vice-versa.
/
Why the restriction on a text file? Why no arbitrary binary data?
/ Are there any example application for this in u-boot.
/
See the "tftp" or "nfs" commands.
Best regards,
Wolfgang Denk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
