On 05/01/2014 10:47 PM, Marek Vasut wrote:
> On Thursday, May 01, 2014 at 06:56:24 PM, Stephen Warren wrote:
>> On 05/01/2014 04:49 AM, Marek Vasut wrote:
>>> On Wednesday, April 30, 2014 at 11:09:55 PM, Stephen Warren wrote:
>>>> From: Stephen Warren <swar...@nvidia.com>
>>>>
>>>> The TRM for Tegra30 and later all state that USBMODE_CM_HC must be set
>>>> before writing to hostpc1_devlc to select which PHY to use for a USB
>>>> controller. However, neither init_{utmi,ulpi}_usb_controller() do this
>>>> today, so the register writes they perform for PHY selection do not
>>>> work.
>>>>
>>>> For the UTMI case, this was hacked around in commit 7e44d9320ed4 "ARM:
>>>> Tegra: USB: EHCI: Add support for Tegra30/Tegra114" by adding code to
>>>> ehci_hcd_init() which sets USBMODE_CM_HC and duplicates the PHY
>>>> selection register write. This code doesn't cover the ULPI case, so I
>>>> wouldn't be surprised if ULPI doesn't work with the current code, unless
>>>> the ordering requirement only ends up being an issue in HW for UTMI not
>>>> ULPI.
>>>>
>>>> This patch fixes init_{utmi,ulpi}_usb_controller() to correctly set
>>>> USBMODE_CM_HC before selecting the PHY. Now that this works, we can
>>>> remove the duplicate UTMI-specific code in ehci_hcd_init(), thus
>>>> simplifying that function.
>>>
>>> This doesn't apply on u-boot-usb/master , so I cannot pick this, sorry .
>>
>> Ah right. That's because I'm working on top of a merge of
>> u-boot-arm/master and u-boot/master, and that includes the following
>> changes to the Tegra USB driver that went in through u-boot-tegra/master
>> -> u-boot-arm/master rather than the USB tree:
>>
>> 8f9fd6caafb8 usb: tegra: combine header file
>> b1d615f3f102 usb: tegra: fix PHY configuration
>> b03f4b3742a7 usb: tegra: fix USB2 powerdown for Tegra30 and later
>>
>> What's the best fix here:
>>
>> * Wait until the previous patches get into u-boot/master, and
>> u-boot-usb/master picks them up, and then apply this series.
>>
>> * Apply this series to u-boot-tegra/master with your ack?
>>
>> There's little point my rebasing this series on top of
>> u-boot-usb/master, and applying it right now, since that will just cause
>> the same conflicts when u-boot-usb/master gets merged into u-boot/master.
>
> Fine, can you poke me when this happens so I can apply ?
Marek, these patches should apply now. I assume you still have a copy,
or should I resend them?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
