Hi, I found the following log messages running from sd card:
[Mon May 12 15:55:57.308 2014] [Mon May 12 15:55:57.308 2014] U-Boot SPL 2014.01 (May 12 2014 - 15:21:20) [Mon May 12 15:55:57.308 2014] mmc boot [Mon May 12 15:55:57.355 2014] reading fpga.bin [Mon May 12 15:55:57.371 2014] spl: error reading image fpga.bin, err - -1 [Mon May 12 15:55:57.371 2014] reading system.dtb [Mon May 12 15:55:57.386 2014] spl: error reading image system.dtb, err - -1 [Mon May 12 15:55:57.386 2014] reading u-boot.img [Mon May 12 15:55:57.386 2014] reading u-boot.img [Mon May 12 15:55:57.433 2014] [Mon May 12 15:55:57.433 2014] [Mon May 12 15:55:57.433 2014] U-Boot 2014.01 (May 12 2014 - 15:21:20) [Mon May 12 15:55:57.433 2014] [Mon May 12 15:55:57.433 2014] I2C: ready [Mon May 12 15:55:57.433 2014] Memory: ECC disabled [Mon May 12 15:55:57.433 2014] DRAM: 1 GiB [Mon May 12 15:55:57.464 2014] MMC: zynq_sdhci: 0 [Mon May 12 15:55:57.464 2014] Using default environment [Mon May 12 15:55:57.464 2014] [Mon May 12 15:55:57.464 2014] In: serial [Mon May 12 15:55:57.464 2014] Out: serial [Mon May 12 15:55:57.464 2014] Err: serial [Mon May 12 15:55:57.464 2014] Net: Gem.e000b000 [Mon May 12 15:55:57.464 2014] Hit any key to stop autoboot: 3 2 1 0 [Mon May 12 15:56:00.522 2014] Device: zynq_sdhci [Mon May 12 15:56:00.522 2014] Manufacturer ID: 2 [Mon May 12 15:56:00.522 2014] OEM: 544d [Mon May 12 15:56:00.522 2014] Name: SA02G [Mon May 12 15:56:00.522 2014] Tran Speed: 50000000 [Mon May 12 15:56:00.522 2014] Rd Block Len: 512 [Mon May 12 15:56:00.522 2014] SD version 3.0 [Mon May 12 15:56:00.522 2014] High Capacity: No [Mon May 12 15:56:00.522 2014] Capacity: 1.8 GiB [Mon May 12 15:56:00.522 2014] Bus Width: 4-bit [Mon May 12 15:56:00.538 2014] reading uEnv.txt [Mon May 12 15:56:00.553 2014] ** Unable to read file uEnv.txt ** [Mon May 12 15:56:00.553 2014] Copying Linux from SD to RAM... [Mon May 12 15:56:00.553 2014] reading uImage [Mon May 12 15:56:00.553 2014] ** Unable to read file uImage ** [Mon May 12 15:56:00.553 2014] zynq-uboot> it apears that it is expecting uImage. However, I would like to boot the image using image.ub (kernel+device tree+ file system) Can someone help me in this regard? Thanks and regards, Heshsham _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot