On Sun, May 4, 2014 at 4:12 PM, Jeroen Hofstee <dasub...@myspectrum.nl>wrote:
> Hello Vasili, > > On zo, 2014-05-04 at 14:48 +0300, Vasili Galka wrote: > > On Sun, May 4, 2014 at 2:24 PM, Belisko Marek <marek.beli...@gmail.com > >wrote: > > > > > > > > > > I've followed your advice and tried the following two on clean tree: > > > > > > > > make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm > > > > am335x_evm_config > > > > > > > > make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm > am335x_evm > > > > > > > > Unfortunately, this does not help. I'm still getting the same error. > > > Try: > > > make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am335x_evm_defconfig > > > make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- > > > > > > it works for me (please update your CROSS_COMPILE) > > > > > As Marek showed above, just use make after configure. I.o.w. remove > the board name as an argument to the second make command. > > Regards, > Jeroen > > Oh, I see. Missed this. Thank you guys!
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
