Hi Marek, I've followed your advice and tried the following two on clean tree:
make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm_config make ARCH=arm CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm Unfortunately, this does not help. I'm still getting the same error. Best, Vasili On Sun, May 4, 2014 at 2:12 PM, Belisko Marek <marek.beli...@gmail.com>wrote: > Hi Vasisli, > > On Sun, May 4, 2014 at 12:56 PM, Vasili Galka <vvv...@gmail.com> wrote: > > Hi, > > > > I'm having some very basic problem with building u-boot. Using clean > > v2014.04 checkout, I run config: > > > > make CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm_config > Add to parameters also ARCH=arm > > > > Which passes fine. But when I run the actual build after that I'm getting > > an error: > > > > $ make CROSS_COMPILE=arm-none-eabi- O=out/am335x_evm am335x_evm > > GEN include/autoconf.mk.dep > > GEN include/autoconf.mk > > make[1]: *** No rule to make target 'am335x_evm'. Stop. > > Makefile:138: recipe for target 'sub-make' failed > > make: *** [sub-make] Error 2 > > > > What am I doing wrong? > > > > Best regards, > > Vasili > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot > > > > BR, > > marek > > -- > as simple and primitive as possible > ------------------------------------------------- > Marek Belisko - OPEN-NANDRA > Freelance Developer > > Ruska Nova Ves 219 | Presov, 08005 Slovak Republic > Tel: +421 915 052 184 > skype: marekwhite > twitter: #opennandra > web: http://open-nandra.com >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
