We are about to switch to Kconfig in the next commit.
But there are something to get done beforehand.
In Kconfig, include/generated/autoconf.h defines boolean
CONFIG macros as 1.
CONFIG_SPL and CONFIG_TPL, if defined, must be defined as 1.
Otherwise, when switching to Kconfig, the build log
would be sprinkled with warning messages like this:
warning: "CONFIG_SPL" redefined [enabled by default]
Signed-off-by: Masahiro Yamada <yamad...@jp.panasonic.com>
---
doc/README.SPL | 2 +-
include/configs/BSC9131RDB.h | 2 +-
include/configs/BSC9132QDS.h | 2 +-
include/configs/C29XPCIE.h | 4 ++--
include/configs/MPC8313ERDB.h | 2 +-
include/configs/P1010RDB.h | 8 ++++----
include/configs/P1022DS.h | 8 ++++----
include/configs/a3m071.h | 2 +-
include/configs/am335x_igep0033.h | 2 +-
include/configs/am3517_crane.h | 2 +-
include/configs/am3517_evm.h | 2 +-
include/configs/apf27.h | 2 +-
include/configs/arndale.h | 2 +-
include/configs/bur_am335x_common.h | 2 +-
include/configs/cam_enc_4xx.h | 2 +-
include/configs/cm_t35.h | 2 +-
include/configs/da850evm.h | 2 +-
include/configs/devkit8000.h | 2 +-
include/configs/exynos5-dt.h | 2 +-
include/configs/hawkboard.h | 2 +-
include/configs/ipam390.h | 2 +-
include/configs/lwmon5.h | 2 +-
include/configs/m53evk.h | 2 +-
include/configs/mcx.h | 2 +-
include/configs/microblaze-generic.h | 2 +-
include/configs/mx31pdk.h | 2 +-
include/configs/mxs.h | 2 +-
include/configs/omap3_beagle.h | 2 +-
include/configs/omap3_evm_common.h | 2 +-
include/configs/omap3_overo.h | 2 +-
include/configs/origen.h | 2 +-
include/configs/p1_p2_rdb_pc.h | 8 ++++----
include/configs/palmtreo680.h | 2 +-
include/configs/pcm051.h | 2 +-
include/configs/sama5d3xek.h | 2 +-
include/configs/siemens-am33x-common.h | 2 +-
include/configs/smdkv310.h | 2 +-
include/configs/socfpga_cyclone5.h | 2 +-
include/configs/tam3517-common.h | 2 +-
include/configs/tao3530.h | 2 +-
include/configs/tegra-common.h | 2 +-
include/configs/ti814x_evm.h | 2 +-
include/configs/ti816x_evm.h | 2 +-
include/configs/ti_armv7_common.h | 2 +-
include/configs/tricorder.h | 2 +-
include/configs/tx25.h | 2 +-
include/configs/vpac270.h | 2 +-
include/configs/woodburn_sd.h | 2 +-
include/configs/x600.h | 2 +-
include/configs/zynq-common.h | 2 +-
50 files changed, 60 insertions(+), 60 deletions(-)
diff --git a/doc/README.SPL b/doc/README.SPL
index 57a39a4..2b4b0b8 100644
--- a/doc/README.SPL
+++ b/doc/README.SPL
@@ -40,7 +40,7 @@ COBJS-$(CONFIG_SPL_BUILD) += foo.o
The building of SPL images can be with:
-#define CONFIG_SPL
+#define CONFIG_SPL 1
Because SPL images normally have a different text base, one has to be
configured by defining CONFIG_SPL_TEXT_BASE. The linker script has to be
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index a163e3d..4827694 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -25,7 +25,7 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index 052a0f1..60bb628 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -34,7 +34,7 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 92913c8..825b711 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -24,8 +24,8 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
+#define CONFIG_SPL 1
+#define CONFIG_TPL 1
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 69b2cb1..7f5aa59 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -19,7 +19,7 @@
#define CONFIG_MPC8313ERDB 1
#ifdef CONFIG_NAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index eabfc85..49b1cec 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -21,7 +21,7 @@
#define CONFIG_NAND_FSL_IFC
#ifdef CONFIG_SDCARD
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
@@ -56,7 +56,7 @@
#define CONFIG_SYS_TEXT_BASE 0x11000000
#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
#else
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
@@ -88,7 +88,7 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#ifdef CONFIG_SECURE_BOOT
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -108,7 +108,7 @@
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
#else
-#define CONFIG_TPL
+#define CONFIG_TPL 1
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 139d4fe..e067f22 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -16,7 +16,7 @@
#endif
#ifdef CONFIG_SDCARD
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -45,7 +45,7 @@
#endif
#ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -79,8 +79,8 @@
#define CONFIG_SYS_NAND_MAX_OOBFREE 5
#ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
+#define CONFIG_SPL 1
+#define CONFIG_TPL 1
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 205adfd..9f85389 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -412,7 +412,7 @@
/*
* SPL related defines
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NOR_SUPPORT
diff --git a/include/configs/am335x_igep0033.h
b/include/configs/am335x_igep0033.h
index c17327f..5023f9d 100644
--- a/include/configs/am335x_igep0033.h
+++ b/include/configs/am335x_igep0033.h
@@ -211,7 +211,7 @@
#undef CONFIG_USE_IRQ
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
/*
* Place the image at the start of the ROM defined image space.
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 4407b45..842c30e 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -298,7 +298,7 @@
GENERATED_GBL_DATA_SIZE)
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 0102ff5..e4eee38 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -307,7 +307,7 @@
GENERATED_GBL_DATA_SIZE)
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/apf27.h b/include/configs/apf27.h
index b10c48c..a97f213 100644
--- a/include/configs/apf27.h
+++ b/include/configs/apf27.h
@@ -37,7 +37,7 @@
/*
* SPL
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_MAX_SIZE 2048
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 515facf..d7c4ffc 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -121,7 +121,7 @@
/* MMC SPL */
#define CONFIG_EXYNOS_SPL
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/bur_am335x_common.h
b/include/configs/bur_am335x_common.h
index 7adc8c0..2ce14d2 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -162,7 +162,7 @@
* under common/spl/. Given our generally common memory map, we set a
* number of related defaults and sizes here.
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
/*
* Place the image at the start of the ROM defined image space.
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index 8182a75..d6e6c19 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -199,7 +199,7 @@
#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index aae05e0..e125fad 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -322,7 +322,7 @@
#define CONFIG_OMAP3_SPI
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 509fe20..5ddb0f7 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -368,7 +368,7 @@
#ifndef CONFIG_DIRECT_NOR_BOOT
/* defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 16a00eb..4a4f759 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -283,7 +283,7 @@
#define CONFIG_SYS_SRAM_SIZE 0x10000
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index 414db42..338633a 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -136,7 +136,7 @@
#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20
/* MMC SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index 73e1624..8144883 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -46,7 +46,7 @@
#endif
/* Spl */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SUPPORT
diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h
index fdd5680..6ad8822 100644
--- a/include/configs/ipam390.h
+++ b/include/configs/ipam390.h
@@ -298,7 +298,7 @@
"-(rootfs)"
/* defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 07ddfc4..22cbdaa 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -665,7 +665,7 @@
* SPL related defines
*/
#ifdef CONFIG_LCD4_LWMON5
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NOR_SUPPORT
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index f401470..49c7a36 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -236,7 +236,7 @@
/*
* NAND SPL
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 47244c0..9823c04 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -348,7 +348,7 @@
GENERATED_GBL_DATA_SIZE)
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/microblaze-generic.h
b/include/configs/microblaze-generic.h
index 486787e..8cbb0ff 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -448,7 +448,7 @@
#endif
/* SPL part */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_CMD_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index f223788..85d438f 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -29,7 +29,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_MAX_SIZE 2048
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index ba55177..2672d96 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -49,7 +49,7 @@
#define CONFIG_ARCH_MISC_INIT
/* SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 0b57421..9bb7d1e 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -389,7 +389,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE 0x40200800
diff --git a/include/configs/omap3_evm_common.h
b/include/configs/omap3_evm_common.h
index 7f3424b..84ba3de 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -260,7 +260,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40200800
#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 007e27f..8786213 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -277,7 +277,7 @@
#define CONFIG_SYS_CACHELINE_SIZE 64
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_TEXT_BASE 0x40200800
diff --git a/include/configs/origen.h b/include/configs/origen.h
index 8258338..b0c6eb1 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -65,7 +65,7 @@
#undef CONFIG_CMD_NFS
/* MMC SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_TEXT_BASE 0x02021410
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 07b6179..e3b6b0f 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -145,7 +145,7 @@
#endif
#ifdef CONFIG_SDCARD
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -174,7 +174,7 @@
#endif
#ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
@@ -204,8 +204,8 @@
#endif
#ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
+#define CONFIG_SPL 1
+#define CONFIG_TPL 1
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
index 3662663..31e89d9 100644
--- a/include/configs/palmtreo680.h
+++ b/include/configs/palmtreo680.h
@@ -205,7 +205,7 @@
/*
* SPL
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TEXT_BASE 0xa1700000 /* IPL loads SPL here */
#define CONFIG_SPL_STACK 0x5c040000 /* end of internal SRAM */
#define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 9af3efd..207a290 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -197,7 +197,7 @@
#define CONFIG_ENV_IS_NOWHERE
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
/*
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 516be85..4b6c2ed 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -243,7 +243,7 @@
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
/* SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x300000
#define CONFIG_SPL_MAX_SIZE 0x10000
diff --git a/include/configs/siemens-am33x-common.h
b/include/configs/siemens-am33x-common.h
index 721c4e6..409fee1 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -137,7 +137,7 @@
#define CONFIG_SYS_I2C_OMAP24XX
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x402F0400
#define CONFIG_SPL_MAX_SIZE (101 * 1024)
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 1388f49..30bad20 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -75,7 +75,7 @@
#define CONFIG_ZERO_BOOTDELAY_CHECK
/* MMC SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SKIP_LOWLEVEL_INIT
#define COPY_BL2_FNPTR_ADDR 0x00002488
diff --git a/include/configs/socfpga_cyclone5.h
b/include/configs/socfpga_cyclone5.h
index 0254249..648619d 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -210,7 +210,7 @@
*/
/* Enable building of SPL globally */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
/* TEXT_BASE for linking the SPL binary */
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 3522c1a..88dac44 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -218,7 +218,7 @@
#define CONFIG_NET_RETRY_COUNT 10
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_CONSOLE
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 9c04c23..f601cca 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -305,7 +305,7 @@
#define CONGIG_CMD_STORAGE
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index ae786cf..b71db60 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -121,7 +121,7 @@
#define CONFIG_CMD_ENTERRCM
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index b51400c..bd25ec8 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -168,7 +168,7 @@
#define CONFIG_ENV_IS_NOWHERE
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40300000
#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index b8c0d54..ea0c4fd 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -134,7 +134,7 @@
/* SPL */
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40400000
#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024)
diff --git a/include/configs/ti_armv7_common.h
b/include/configs/ti_armv7_common.h
index 69d69a5..1f5522a 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -174,7 +174,7 @@
* number of related defaults and sizes here.
*/
#ifndef CONFIG_NOR_BOOT
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_OS_BOOT
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 80985a2..5c5e304 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -331,7 +331,7 @@
#define CONFIG_SYS_SRAM_SIZE 0x10000
/* Defines for SPL */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index 5ac6e64..d362087 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -21,7 +21,7 @@
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for
U-Boot */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_MAX_SIZE 2048
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index c6d4763..e53d3c4 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -17,7 +17,7 @@
#define CONFIG_SYS_TEXT_BASE 0xa0000000
#ifdef CONFIG_ONENAND
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_ONENAND_SUPPORT
#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x2000
#define CONFIG_SPL_ONENAND_LOAD_SIZE \
diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h
index 437472f..2bf5c10 100644
--- a/include/configs/woodburn_sd.h
+++ b/include/configs/woodburn_sd.h
@@ -20,7 +20,7 @@
/*
* SPL
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/x600.h b/include/configs/x600.h
index 7405419..32ad621 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -273,7 +273,7 @@
/*
* SPL related defines
*/
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_SPL_TEXT_BASE 0xd2800b00
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 731e69b..27601ec 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -229,7 +229,7 @@
#define CONFIG_CMD_TFTPPUT
/* SPL part */
-#define CONFIG_SPL
+#define CONFIG_SPL 1
#define CONFIG_CMD_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LIBCOMMON_SUPPORT
--
1.8.3.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
